How to Set Your Honeywell Brand Door Knob Codes, Auto-lock, Delete Old C...

In my video "How to Set Your Honeywell Brand Door Knob Codes, Auto-lock, Delete Old Codes and Factory Reset" I show you how to program your new Honeywell Brand programmable door knob to perform to your liking. It has silent features as well as auto locking and interior control to the max. It was a little on the expensive side to purchase but it was well worth it as it contains a bunch of unique security features.

The Honeywell Digital Knob Handleset features a programmable lock that allows you to set up individual codes for multiple users. a backlit keypad that automatically lights up when its being used, and a remote control fob for easy access. Adjustable latch fits 1-3/8 In. - 1-3/4 In. thick doors and 2-3/8 In. - 2-3/4 In. adjustable backset. Lock can be easily rekeyed by any locksmith. Locks have a Grade-3 Residential Security; tested by ANSI (American National Standards Institute) to meet standards for residential security. E-Z installation with a Phillips screwdriver when holes are pre-drilled into door. Can be installed on left or right handed doors for your convenience. Package contents include an adjustable latch, adjustable backset, mounting hardware, instructions, drilling template, remote control fob with back up key, and two (2) additional entry keys for non-electronic access. They claim that this is backed by a mechanical and finish limited lifetime warranty.

Here’s a link to the owner’s manual and set up guide:

http://honeywellsafes.com/UserFiles/Manuals/HW%20DIGITAL%20KNOB.pdf

TO UNLOCK THE LOCK Using Keypad: Enter a valid User Code (default code is 1234) and press (Unlock button) and hear 1 beep and lights green.

TO LOCK THE LOCK Using Keypad: Press (Lock Button) and then hear 2 beeps and lights red.

Changing Programming Code

CHANGE CURRENT OR PRESET PROGRAMING CODE (PC)

Factory default Programming Code (PC) = 123456, this is the master password for your lock. All programming functions require this code. Follow the below sequence to change the Programming Code (PC) to your custom 6 digit combination.

Type in (PC) + (Unlock Button) + 4 + (Unlock Button) + (New 6 digit PC of  your choice) + (Unlock Button)+ Re-enter New PC + (Unlock Button)

Hear 1 beep and Light Indicator illuminates green. Record New and Changed Codes so you won’t forget them.

 

TO ADD A NEW USER CODE (you can add up to 50 new user codes)

The User Code (UC) must be a 4-8 digit combination. Each User Code (UC) is then linked to a User ID (ID) (which is any number between 01-50) to identify an individual User Code (UC). (User ID [ID] 1-9 should be entered as 01-09 so they are 2 digits).

As an example: to add the User ID-08 to User Code-5678, enter the following:

(PC) + (Unlock Button) + 1  + (Unlock Button) + (08) + (Unlock Button) + 5678 + (Unlock Button) + 5678 + (Unlock Button)

Hear 1 beep and Light Indicator illuminates green. NOTE: When a NEW USER CODE is set, the default factory code (1234) is deleted for safety. Record New and Changed Codes

Deleting User Codes

Delete one existing or preset user code

The programmable knob comes with a factory User ID (ID)= 01 for User Code (UC)=1234

In order to delete 1 User Code (UC), the lock must have more than 1 User Code (UC) in it’s database

(PC) +  (Unlock Button) + 2 + (Unlock Button) + Existing (ID) + (Unlock Button) + re-enter (ID) + (Unlock Button)

Hear 1 beep and the Light Indicator will illuminate green.

 

Delete all User Codes:

This will delete the user codes (UC) but not the programming code (PC)

(PC) +   (Unlock Button) + 3 + (Unlock Button) + re-enter (PC) + (Unlock Button)

Hear 1 beep and the Light Indicator will illuminate green.

Automatic Lock Function:

This one is one of my favorite functions of this nice lock

Set or Cancel Auto Lock

You can set the lock to automatically close after each time the lock is opened. Time value range = 20 - 900 seconds, enter the following:

To set the auto lock (PC) + (Unlock Button) + 5 + (Unlock button)  + Time Value + (Unlock Button)

Hear 1 beep and the Light Indicator will illuminate green

 

Secure Lock-out Period

Warning sounds and LED flashes red after 4 incorrect code attempts: Keypad shuts down for 30 seconds.

 

Turning Sound On or Off

You can “mute” or turn the “sound on” on your lock by entering the following. (Factory setting is sound on).

(PC) + (Unlock Button) + 6 + (Unlock Button) + 1 or 2 + (Unlock Button)

1=sound Off

2=sound on

Sound Off (1) - Light Indicator illuminates green. Sound On (2) - Hear 1 beep and Light Indicator illuminates green.