How to Adjust the Idle On a Honda XR250R Motorcycle [Honda XR250 DirtBik...

IKEA's HEMNES Eight Dresser Drawer Step by Step Assembly Tutorial [IKEA ...

Detailed step by step assembly instructions fro start to finish in my "IKEA's HEMNES Eight Dresser Drawer Step by Step Assembly Tutorial [IKEA HEMNES Dresser Assembly]" video. 

Here's a (paid) amazon link to a white one:

Ikea 8-drawer dresser, white stain 228.52617.3834:

https://amzn.to/3pzKH4D

DIY How to ReHandle Your Old Woodcutting Axe Head Quick Tutorial [Axe He...

This particular axe head belonged to my late wonderful Grampa. He used this as a make shift hatchet once he either ran over the handle or broke it off somehow. Whatever he used originally to fix the axe head was some good old stuff because I had one heck of a time getting the old handle off. I drilled, pounded, drilled, whacked, cussed, and drilled and pounded some more until it finally came out. Put this nice new beautiful handle on it and figured I'd go ahead and make a YouTube Short from the "cut-down" process since I'd already recently done a full length video on one of his other passed down axe heads.

Here is a paid link to a TRUPER MG-HM-30 Replacement Handle For Axes 30" (76cm):

https://amzn.to/3EyzYME

Allen & Roth LED Flush Mount Power Saving Ceiling Light Installation Tut...

In my Allen & Roth LED Flush Mount Power Saving Ceiling Light Installation Tutorial Part # 2592466 I go through the quick and simple step by step process to install this allen and roth led light led flush mount ceiling fixture.

I unbox this so here it is out of the box.  One of the things is the back side of it it's kind of cool comes with these these wire connectors here so makes it easier i haven't i haven't used these ones before but i'm going to give it a shot

ground white and black so this should be an easy easy wiring job here's what it looks like good looking light

right there's step one so we're gonna pull the base away from the outer case of that okay this piece here will pull off of there see it's got these little tabs on that so this black piece just comes off from the assembly here now this piece will twist off this piece twists off of there

i already twisted it that way exposes that and then you can see here you can get it mounted and good there step one is done two

okay select our color temperature that we want i'm gonna go ahead and this is white so you can cut you have all your settings right there all adjustable here

so i'm going to go all the way to cool i'm going to go as bright as we can if we want to knock it down ever we can just go right here and set it there okay step two is done step three i'm gonna go ahead and install our screws and the sides of the the cup there okay we've got our screws installed now it's time to wire it up all right this is pretty cool so it even shows you kind of how to wire it you just stick your other one in there so we already know it's going to go white and white black to black ground to ground but what i didn't know that's a new fixture to me right there connector so that'll be cool this even tells you black to black white to white green to copper bear let's make it pretty stinking nice so as far as these connectors go you can see the strength of it i've just got the ground in there it's holding the whole light up so i don't typically recommend this but i kind of want to test the strength on that so i'll do the same thing with these two wires just pop them right in next to each other just push them in it's pretty good okay there we go got them connected i'm gonna turn the power on make sure it works before i get it secured hey all right works step four is done we got it wired and it works now we're just going to screw this up in there i'm going to twist that onto the screws and then tighten it up so i just left these long you know so they would protrude down from the ceiling so we could just pop them through that hole and then twist it that way now i'll just tighten these up

there's that now we're going to take this piece here see where these little divots are right there that's where they're going to go and slide on they're going to twist it that way it'll stay okay so what i'm doing now with this black thing so this is supposed to go on before you put this whole thing up so i'm actually just taking these tabs so there's two slots right there taking these tabs and just kind of bending them down that way it won't come off come off of there i don't know any other way to do it so i just bent that down not there too now i can just screw the whole thing on so same with this one there's four of them kind of bending the tabs down in there all right let's screw this thing up to the fixture now there we go much better just screws right on threads right on there uh clockwise there it is got her on a dimmer switch

all right thanks for watching you guys

and there's how it looks with a little bit of a softer setting