SAMSUNG Brand Dryer with Steam Option-Installation Tutorial Demonstratio...

This SAMSUNG Brand Dryer with the Steam Option is a great dryer and was purchased at Lowe's. While at the store be sure to purchase the correct dryer cord and the installation kit. These don't come with the purchase and need to be bought separately. Buy some teflon tape as well. No need to pay someone to do this as it's super easy to do yourself. The first step is getting it unboxed, into your house and into place. You'll typically need two people or a dolly. If you are really fancy you can put in on a custom made wooden foundation to place it on. Once in place, open up the installation kit and pull out the hoses and components. Hook a stainless steel braided hose to the cold spigot after wrapping with teflon tape. I tightened down the connection using channel locks. From that hose I installed the 'Y' connector provided in the installation kit. From that 'Y' on the cold line, one side is going to go to your dryer and the other to your dryer. All connections made with teflon tape to keep from leaking. Now take the longer hose with the 90 degree elbow on it and hook it to your dryer. The elbow side is what connects to the dryer. From the "Y' connector on the cold line, hook a hose from the 'Y' to your washer for cold water to the washer.

Now it's time to hook up the electrical portion. It's a good idea to take a picture or template of some sort with you of your dryer plug to the hardware store to make sure you buy the correct plug pattern unless you retained your old one and it's still serviceable.



Things to buy or have on hand for installation:

1. Dryer Cord

2. Installation kit

3. Channel Lock Pliars

4. Teflon Tape

5. Dryer Vent

6. Hose Clamp for Dryer Vent



So now that you have your water system all hooked up it's time for the electrical and vent which is really easy as well. Un-package your new dryer hose and hook up the three wires in the back of the dryer. You do this by unscrewing the sheet metal panel in the back. Hook the cord to the three terminals inside the panel and secure it. Be sure to install your safety clamp as a protective measure in case the dryer gets moved, it won't destructively pull the cord's electrical connections from the terminals resulting in a possible electrical fire. Now it's time for the vent. Fasten the dryer vent over the hard piped vent connection along with the hose clamp and fasten. Do the same with the connection as the dryer.



Like and subscribe to DIYTechnician!



www.diy-technician.com

https://the-avant-garden.blogspot.com



Order new washer dryer here: https://amzn.to/2GZGkZh