Made my first ever DIY Hand Forged MidEvil Long Twisted Spoon Tutorial Demonstration [How to Forge a Spoon] as a present and it was a lot of fun. Used a propane burner and pounding block to hand made this big spoon.Once forging was complete I coated it in linseed oil.
Mouth watering video "How to Grill Steaks In Singapore | Deliciously Juicy Australian Steaks Cooked Medium Rare and Well Done". Cooked these tasty slabs at for a few different time frames as there were three different requests, one barely cooked (a lot of red inside), one medium and the other well done. I grilled these up with a little bit of Johnny's on each side. They turned out delicious. I did cut the fat off a little on two steaks(per request), and the left it on the third. Hard to beat feasting on freshly grilled steak with a baked potato.
If all of your other gas burners are working but one isn't, it's likely that you have a cleanliness issue in the bottom gas inlet beneath the burner's metal parts on the stovetop itself. It's a very simple fix once you know how to do it. This is a common problem with gas stove burners. If you have a small paperclip handy, this will work just fine. Better yet, if you have a set of torch tip cleaners, even better. If you don't have any, you should buy some. I've provided the link below for a set of these and they are perfect to keep around for when this happens to you. They are so cheap there's no excuse for not owning some, especially when it means not being able to cook.
Before working on this or any other gas system make sure you turn off the gas, even for a little fix like this because you will be somewhat up close and personal to where the gas exits into the "bowl" portion of the burner located beneath the special metal parts. After turning off the gas you can now start removing the components that make up the burner portion. Most of them just kind of sit on top of each other. Once you have removed all the burner parts and set them off to the side you can now take your cleaner from your set of tip cleaners or your small paperclip and ream out the gas oriface in the center at the bottom. Be sure to get a tip cleaner or paper clip that fits just snug as you don't want to force it in there or wind up breaking it off while a portion of it is stuck inside the oriface (then it will never work). Now reassemble the metal parts that make up the burner. Turn the gas back on and light the burner. If it doesn't work at first try the process one more time. If it still doesn't work after that you likely have another issue that is causing the problem and call a professional.
Summary of this DIY fix is as follows:
Step one: Shut off gas
Step two: Take it apart
Step three: Obtain small paperclip
Step four: Clean out bottom gas oriface with paper clip
