DIY Allen and Roth Blackout Window Shade Installation Demonstration [All...

This Allen and Roth window shade was super easy to install and can be accomplished in a matter of minutes. I used a cordless drill for securing it's only two brackets to the interior of the window frame. Purchased at Lowe's. They are light weight and keep the sun from blasting through the window as well as provide maximum privacy. I take you step by step through the process in my "DIY Allen and Roth Blackout Window Shade Installation Demonstration [Allen and Roth Blackout Shade]" video. Hey guys get some blinds i'm gonna put up here these allen and roth blinds but this is the before picture 47 inches across here's the blinds that we're going to be using Okay again this was 47 inches across and these are 46 so you can see there's a little bit of a gap in there which is what you want which is the window seal will kind of make up that gap as well but if we did it on the full 47 i'm not sure that this would fit here's the brackets for these things okay we have a choice of either doing an inside mount like this or an outside mounting outside the frame here okay see those two dots there those are the marks i made with the pencil and i just made that because i'm going to pre-drill my holes right there Now we're going to screw these into the two holes we just made to secure the bracket to the overhead all right we got our brackets up i'm just gonna pop the thing in there just snaps right in there gonna angle it down this piece is the handle to pull the shade down and it just grabs that lower edge you just snap it right on there i'll show you okay this is the upper portion so this just grabs that lip right there here we go That was too easy Thank you.

Allen and Roth "Welton" Outdoor Wall Lantern Porch Light Installation Tu...

Here's how I installed this new LED Allen and Roth "Welton" Outdoor Wall Lantern Porch Light Installation Tutorial Part #2602001 [LED] model. I unbox and install this new power saving light fixture which also adds an upgraded decorative look. I first located the the breaker for the circuit that I was to be working on and shut off the power. I then verified I shut off the power with my voltage tester (will leave a link below to purchase on on amazon from which I get paid a very miniscule amount from if you purchase) and then unhooked the old light fixture. This one on this particular installation was pretty easy, it was just white to white, black to black and ground to ground. Once hooked up and verified that the wiring is super tight and not coming apart (I tug on it just to make sure), then I fire the power back up. Customer was very happy with this upgrade. 

Klein Tools NCVT2PKIT Non-Contact Voltage Tester with Receptacle Tester, 12-48V AC or 48 - 1000V AC Dual Range for Broad Application (paid amazon link):

https://amzn.to/3n2HbxJ

Please stop by my website:

https://www.diy-technician.com