DIY Toyota Tacoma Headlamp Changeout Process and Upgrade [Toyota Tacoma ...

This video shows you the simple process of replacing your headlamps on a Toyota Tacoma. I had just completed shining up the outer headlamp surfaces (see my video on this) with a 3M brand headlight restoration kit but wanted to further improve my night driving visibility. It had gotten so bad that we couldn't barely make out the white line on the side of the roads in certain areas that were not otherwise lit up. The new headlamps are "100%" brighter according to the packaging and cost around $50 at the local NAPA auto parts store. Between cleaning and polishing the outer surface of the headlights and changing out the bulbs, the night vision while driving has improved quite a bit. I was glad I went with the 100% brighter as they actually were not as bright as I thought before installing them. I didn't want to be the jerk out there whose headlights are so bright it appears that the high beams are on. This is not the case with these just in case you were wondering. The new headlamps come with a 3 year warranty as well so I keep the receipt and old headlamps (for backups) just in case I needed to cash in on that warranty. The steps for chaining this out are very easy and are as follows:

No tools necessary.....

Step 1: Open hood

Step 2: Remove electrical connector plug from back of head lamp (it pulls straight out by hand)

Step 3: Remove rubber boot

Step 4. Unlatch holding spring

Step 5: Pull lamp out and install new one

It's just that easy!!!! 

Please stop by my website and check it out:

https://www.diy-technician.com

Here's a paid link in case you want to change out the whole light assembly rather than polish the old ones:

For Toyota Tacoma Headlight 2005 2006 2007 2008 Driver and Passenger Side Headlamp Assembly Replacement:

https://amzn.to/3nyzxeB

Hotpoint Brand Oven Light Bulb Installation

DIY "How to" Hotpoint Brand Oven Light Bulb Installation Tutorial Instructional Demonstration. If you know how to do this then its very easy, but for those of us who don't, well...it can take a minute or two to figure out. If you watch this video, I will show you exactly how to replace the bulb in your Hotpoint Brand Oven. Many people just leave the light bulb in the burned out state for the life of the oven. I couldn't imagine not being able to see what's cooking or what it's looking like.
Many people, like myself are procrastinators. "Well the oven light is out" is what you may tell yourself. It's tough to get in there and get after it as it's one of those things that you can make do without. That being said, it's much nicer to have a working oven light than not. So if you can find the gumption to change out the light bulb, pop open the oven door and get after it. The first thing you want to do is take the securing wire and push or pull it off to the side. This is your first access point to getting this done. Be careful not to drop the glass that goes over it as you do. You can do this all with one hand no problem. So what you want to do is move the wire over while keeping some pressure on the glass and once the wire is pushed over, than sort of captivate and capture the glass. This will allow you to gain access to the light bulb. You will need a headlamp or flashlight for this job. Now take the existing light bulb and unscrew it. Now take your new one and screw it in.
Anyway, hope this little quick video helps you out. Good luck!

Link to the light bulbs: https://amzn.to/2ZVjvOr

www.diy-technician.com