How to Use a Vacuum Sealer Food Saver Model Number VS3180 Tutorial [Food...

Need to know how to use your vacuum sealer Food Saver? Join me in my How to Use a Vacuum Sealer Food Saver Model Number VS3180 Tutorial [Food Saver Instructions] video where I show you how to operate it from start to finish packaging up some fresh caught salmon. Here'a paid link to one in amazon: FoodSaver VS3150 Multi-Use Vacuum Sealing & Food Preservation System with Additional Roll, Charcoal Stainless Steel, Black: https://amzn.to/3BY6GFi Here's the subtitle words of the video: Hi my favorite you tube folks, this video is on this food saver we got from costco model number vs3180 food saver vacuum sealing system so we bought this and some bags we're gonna vacuum pack some salmon. okay plug this thing in and we've got the bag in here like this what we're gonna do is just seal up the very this first edge right there so you just bring your bring it till it's right in there just to the edge right there and then you seal up that first end okay so now you close it and then this over here you have open store and operate so we're gonna go ahead and we're gonna we're gonna put this all the way down as soon as you do that the lights all come on up here now we're just going to go ahead and seal the first one so we're going to go ahead and push seal okay so now that the seal indicator light is off that means this sealed so we'll go ahead and pop that out we got our seal there okay so now this little piece just came out i had to tuck it back in there this little rubber piece but this sealed you can do one or two seals we're just gonna do one for now okay so you just have enough until uh this is how you know you get as big a bag as you want as long as it's gonna fit your your filet or whatever your push that down okay and now we go ahead and cut it okay i went ahead and flipped the latch down again and i'm going to go ahead and cut it there we go now pop the lid back up and then put our fillet in here okay we've got our bag cut now so we're going to lift this back up and roll the excess back in there now we're going to seal up this end after we put our filling this end that we're going to seal up is going to go right in that drip tray that green one and that's removable you can take that out and clean all right we got our fillets in there i'm going to open this back up and put the edge in here a really good tip when you are sealing uh fish you want after you wash it you want to pat it dry really well with some paper towels okay now we're going to go here to operate okay now uh we're gonna push the vacuum button okay there's vacuum right there and so okay we're gonna push the vacuum button right here you can see it's sucking all the air and moisture to it once this indicator light is off then your item is sealed so it's still sealing it okay it's sealed now we're going to go ahead and pop this up to the top of the top there's our seal and we're all set all right here's the meat freezer this is our crab bait oh yeah there's our human stuff there we go you might be wondering what does this thing do you have to uh buy special bags to use this this is a handheld sealer there's a special circle on the bags you buy to use that so you can't use the bags the regular food saver bags for that which is okay we're just going to use our regular ones all right i'm going to finish this up thanks for watching. More about this item: This FoodSaver Multi-Use Preservation System keeps food fresh in the freezer up to 5x longer, and fresher longer in the fridge and pantry, compared to ordinary storage methods—and helps prevent freezer burn as well It's versatile as it combines heat sealer and handheld vacuum sealer in one unit; use the heat seal strip for freezer storage, and the handheld sealer for fridge and pantry storage This unit is equipped with 4 custom settings: seal delicate foods like baked goods without crushing using the pulse setting; marinate in minutes with marinate setting; dry and moist settings ensure an airtight seal is achieved regardless of the type of food you are sealing Roll storage with built-in cutter bar so you can create custom-sized vacuum seal bags; time-saving features makes bags from rolls faster, by cutting your bag as you're sealing your next bag; alignment tool and angled opening ensure ideal bag placement; removable drip tray This is so easy to use and all you have to do is simply press vacuum button to remove air and seal, and LED light indicates sealing is complete. It keeps food fresh linger, it's versatile, has 4 settings and more features, and it's easy to use.

DIY Home Brew: Northern Brewer | Dead Ringer India Pale Ale Kit

I ordered this awesome beer kit from amazon. In this DIY Home Brew: Northern Brewer | Dead Ringer India Pale Ale Kit video, I take you step by step through unboxing, brewing and taste testing. This was ready to drink in just over a month. The first thing I did was heat approx 2.5 gallons of filtered water to 155F or approx 68F. Then take the provided grains, pour them into the grain bag, tie off the grain bag and place it into the water once it reaches temp. Maintain that temperature, no higher and no lower (plus or minus a couple degrees), and let it steep for 20 to 30 minutes. Once 20 to 30 minutes has elapsed, pull out the grain bag and let drain over the newly created wort. Don't squeeze it. Then it's time to bring the wort to a slow rolling boil. Total boiling time will be 60 minutes. Once boiling add the liquid malt extract. and stir in well. While it's boiling I added cool filtered water to the fermenter. I then added hops at 10 minutes time intervals and stirred them in. Once 60 minutes in complete I transferred the wort immediately to an ice bath. Once completely cooled I transferred (siphoned) the wort to the fermenter and topped it off with some additional filtered water. I then added the yeast and shook it around a little. Then I installed the air lock and let the brew sit for a couple weeks in a dark area. After a couple weeks I transferred it to a separate fermenter that was actually only used as a bottle filler and then mixed and added some hops and the priming sugar solution to give the brew carbonation. I then bottled it and let it sit for a couple weeks before sampling.

DIY How to Install Pre-Fabricated Deck Railing and Posts Quickly

This pre-fabricated deck railing set up was purchased at Lowe's. It was a little more than I wanted to pay and wasn't completely top quality but it was able to be constructed quickly and effectively fit the billet of having a deck rail in place on this second story outside deck. The reason I needed a new deck was because the old one had been attacked by carpenter ants in many places so after exterminating all of the carpenter ants I removed the old deck. It made for some good dry backyard bonfire wood. I then took perimeter measurements and figured out how much deck rail I would need. This pre-fabbed railing was a little more than I really wanted to pay so I didn't want to overestimate. I got my materials home and then kind of layer it out to so I could get a visual on how it went together. The first step in construction was to install the 4 X4 posts. I secured them to the outside of the deck with lag bolts, of course, pre-drilling them before sinking the lag bolt in. Since I was a one man show I was able to clamp them into place before permanently securing them. I used two lag bolts per post. Same goes for the rails. I roughly fit them up before  securing them. Pre-drilled the holes then used weather proof drywall screws to hold them in. I pre-drilled the holes using a bit slightly smaller than the screw itself. Since each rail section was a set length I ended up having to trim a little off of one. I measured twice to make sure I had the correct length. I used my hand held power saw to whack the extra part off. Overall this deck rail was super easy to install and had it done in just a few hours as I took my time installing it. The pro's are that is was quick to install, it looked attractive and matched the design of the house, was plenty sturdy (sturdy enough to lean against), the wood was already pre-stained,  and was very simple to install by myself. The only negatives were that I wish the wood was a little thicker on the rails themselves and the other is that this set up wasn't conducive to a simple gutter system if you wanted to put one on.



Here's a link on amazon for the quick grip clamps I used here. I use these for a number projects as well:



Quick Grip Clamps: https://amzn.to/3akRzIP

Kwikset Door Knob and Dead Bolt Installation Instructions

I purchased this new Kwikset Brand Door handle and deadbolt kit from Lowe's for about $40 or so. Got the kit home and started unboxing it and setting my parts out prepping them for installation. I gave it a rough assemble just to see how it is all going to go together so I had an idea of what to expect once I put it in the door. To get the process started for the door handle itself,  I put the latch core inside the door for a test fit. The nice thing is that almost all doors come with standard size pre-drilled and prefabricated holes to accommodate standard door handle kits. The next step was to loosely insert the inside and outside door handles for a rough fit up. Now I inserted the long set screws in through one side and threaded them into the opposite side (inner to outer). I screwed them down snug with a Phillips head screwdriver. Then I slide the decorative collar of that and it just snaps on. After that comes the handle itself. I slid the handle on and tightened it down with an Allen wrench which comes with these types of kwikset kits. I then did the same thing with the other side. For the next step I screwed in the two screws for the latch that secure it to the door. I tested for smooth operations with no binding or sticking.



Deadbolt portion:

I inserted the latch or core of the dead bolt into the door for a test fit. After knowing that it fits well it was time to place both halves of the dead bolt locking assembly into core or latch portion. The somewhat semi circular shaft fits snugly into the latch insert. Once fit up I lined up the set screw holes so they can be seen from the opposite side. Then it was time to insert the set screws and secure them tight. I ensured smooth operation with no sticking or binding. The door is now capable of being fully secured.



Kwikset Door Knob and Dead Bolt Installation Tools Needed:

Phillips head screwdriver

Allen wrench (usually provided)



 Lock & pin pad https://amzn.to/2WICLRu



My website: www.diy-technician.com

Project Source Brand Overhead Ceiling Light Fixture Installation-Model#0...

As homeowners and handymen we are always faced with having to do upgrades. It's crucial that us DIY technicians know how to handle these kids of tasks. Whether your a Mr. or Ms. Fix it kind of person, if you don't want to pay someone to do these kinds of DIY home electrical jobs than watch my videos on it. This one was a simple light fixture change out. I want to stress a couple of safety items here. First be sure the power is off. Second, be sure the power is off. Third, don't stand on something unsafe such as a slippery chair or bucket to reach up and perform this task. Get a ladder, get a voltage detector, turn off the breaker, turn off the switch, check for current.

Now open your new Project Source light fixture box and lay out all your new parts in an organized fashion. Unscrew the old mounting bracket. There are times when you don't have to do this when you get lucky and the existing mounting bracket will fit your new installation. After unscrewing then pull your wires down a little, inspect them and make sure they are good to go for your new installation. Next step is to reinstall your new mounting bracket into the recess. The same place from which you pulled the old one out. It's helpful to pre thread your screws into the metal mounting bracket as you will be installing this into the overhead. This goes for the little green ground wire screw as well. Using wire nuts, wire your new fixture to the house wiring accordingly. It's sometimes useful to pre-bend your grounding wire in a "U" shape to facilitate it's wrapping around the green ground screw.

Install your mounting screws and slip the new light fixture on them and then tighten. After securing the base part of the light to the ceiling via the mounting screws, go ahead and install the light bulbs. Now the center threaded rod gets installed. Don't worry about which side of the threaded rod goes in first because it bottoms out in the base, meaning, you can only thread it in so far until it stops. Now install the glass portion of your light and thread on the plastic washer, metal, washer and securing nut. Snug it up with a wrench. Not too tight, just snug. Now you can place your decorative cap and decorative end nut on. Now you're all set.



LInk to Overhead Ceiling Light: https://amzn.to/2YuXTXR

Project Source Brand Overhead Ceiling Light Fixture Installation-Model# 0423825

IKEA "HUTTON" Bottle Rack Assembly DIY Instructional Tutorial

Follow along with me in my IKEA "HUTTON" Bottle Rack Assembly DIY Instructional Tutorial Video. These racks are nice for wine, vinegar, beer, etc. The HUTTON model from IKEA is really easy to assemble and you can stack them one on top of each other as high as you want.

All you need is a  cordless drill or screwdriver with the correct size Allen head (hex head) bit. I believe the kit comes with a little metal Allen wrench if you don't have one. This is a simple one person assembly. I recommend you get a nice flat surface to work from whether that be your kitchen table, work bench, or even sitting on the floor.

Here's the link to it: https://amzn.to/32aLnOD

DIY Pallet Project: Shop Table From Pallets-Repurposed Wood Made Into Us...

In this DIY Pallet Project: Shop Table From Pallets "How to" video, I take you step by step through my process on using old pallet wood to create a shop table. For the Table top, the first step was to get all my slats separated, get the nails pulled out, and clean them all up. I cut them all to the same length and placed them on two longer aluminum clamps. Pipe clamps work well here too. Once I get them square, flat, and straight, then I took two perpendicular lengths of wood and drilled and screwed them up through the bottom to hold it all in place. I then drilled and screwed 4 equal legs on. I then cut a couple of blocks for extra reinforcement, drilled, and screwed those on as well in between the legs and the cross members on the underside of the pallet table surface. I custom made the metal angle iron brackets as well. I had some old metal bed rails laying around so I sectioned them up and drilled holes in them to facilitate screws and used them for reinforcing brackets. I used some repurposed lag bolts to secure these. I sanded the top surface of the table so it was nice and smooth and flat. I decided that I needed a shelf down below for extra storage so I hit up my pallet pile again. I pulled off some more slats carefully so as not to crack or break the boards in the process. I got the nails all pulled out and cut to length on the table saw. I used some of these for the trim around the top of the table so it had a nice finish. I then created the second shelf down below using more pieces from the pallet pile and nailed them together with a brad nailer.
Tools used:
Table Saw: https://amzn.to/31W6epw
Cordless Drill: https://amzn.to/31WRgiO
Brad Nailer: https://amzn.to/30UA50b
Air Compressor: https://amzn.to/35ftvop

DIY Pallet Shoe Rack Organizer

This video provides Step by step instructions on how I made a DIY Pallet Shoe Rack that lasted for years for FREE!

After hand selecting which pallet I wanted to use I gathered up the necessary few tools I thought I would need. I didn't want the shoe rack to be too high so I but the pallet right in half with my hand saw. I also needed it to be limited to a certain width based on where I wanted to install it so I cut 1/3 of it off, widthwise with a skilsaw. Although I switched to a power tool here, you could do it all with a handsaw.

I then took my crowbar and hammer and removed the lower board. This gives me a top row for shoes and then a bottom row as well. I blew it all down with my air compressor to remove the saw dust.I then secured it to the wall with a couple of screws. Quick, easy, and free shoe rack organizer. You can paint it or have one of you kids paint it too for for an added custom touch.





Hand Saw: https://amzn.to/2nnuzWd

Crow Bar: https://amzn.to/2LSvlns

Cordless Drill: https://amzn.to/2pSseU7

Skilsaw: https://amzn.to/35aaV0R

Air Compressor: https://amzn.to/2OrJU34

Air Compressor Hose: https://amzn.to/2McblLm

Air Nozzle: https://amzn.to/35eBS3l



https://the-avant-garden.blogspot.com

https://diytechnician.tumblr.com

www.diy-technician.com



#pallets, #projects, #DIY, #wood, #woodworking, #DIYTechnician, #shoerack, #organizer

Kwikset Door Knob and Dead Bolt Installation Instructions

How to install window screens on house windows

Step by step tutorial in the basics of installing a window screen. The side with the thin metal springy clips attached to it goes in first. The plastic tabs go inward as it makes it ever so slightly tougher to remove from the outside. The trick to getting all four corners inserted is to get three corners in first leaving one slightly out, then the fourth and final corner will barely slip in. In this example I put the right two corners in first because they had the metal spring tabs on them, followed by the upper left corner, then finally the bottom left corner.

Not sure if this is any good: https://amzn.to/34XDKNl

www.diy-technician.com

Hotpoint Brand Oven Light Bulb Installation

DIY "How to" Hotpoint Brand Oven Light Bulb Installation Tutorial Instructional Demonstration. If you know how to do this then its very easy, but for those of us who don't, well...it can take a minute or two to figure out. If you watch this video, I will show you exactly how to replace the bulb in your Hotpoint Brand Oven. Many people just leave the light bulb in the burned out state for the life of the oven. I couldn't imagine not being able to see what's cooking or what it's looking like.
Many people, like myself are procrastinators. "Well the oven light is out" is what you may tell yourself. It's tough to get in there and get after it as it's one of those things that you can make do without. That being said, it's much nicer to have a working oven light than not. So if you can find the gumption to change out the light bulb, pop open the oven door and get after it. The first thing you want to do is take the securing wire and push or pull it off to the side. This is your first access point to getting this done. Be careful not to drop the glass that goes over it as you do. You can do this all with one hand no problem. So what you want to do is move the wire over while keeping some pressure on the glass and once the wire is pushed over, than sort of captivate and capture the glass. This will allow you to gain access to the light bulb. You will need a headlamp or flashlight for this job. Now take the existing light bulb and unscrew it. Now take your new one and screw it in.
Anyway, hope this little quick video helps you out. Good luck!

Link to the light bulbs: https://amzn.to/2ZVjvOr

www.diy-technician.com

Ryobi Brand Battery Powered Leaf Blower-Unboxing and Use

DIY IKEA "BROR" Shelves Unboxing and Assembly

These shelves were very easy to put together. The directions they came with were very clear. Although the shelves are IKEA brand, they are made in China. That being said, the material they use to make these are probably the absolute bare minimum thickness they could get away with without them falling over. The fact they were made in China keeps the price down, but it keeps the quality down as well. These shelves will serve their purpose but I would definately not introduce a huge load to the units especially if you only purchased one. The fact that I have three linked up here gives them a little stability. Speaking of stability, don't skip installing the "X" shape stiffeners on the backside of these. They do help (reduce)their potential to wobble quite a bit. One thing I did not to in the above video was secure it to the wall. Securing it to the wall will also add to their stability quite a bit as well as add a safety feature to keep them from falling forward, so I recommend doing this.
According to https://www.diy-technician.com the best way to obtain these items is not to try to drag them out of the store on a busy weekend but order them online and have them delivered.



I buy from Ikea but here's why I despise going there.....

They got me. Along with millions of others. I'm no longer unique. No longer a hold out. No longer a spectator. I'm just like the rest. I ran right off the cliff with the rest of the herd. I suppose I would call it jealously more than anything. I'm guess I'm somewhat envious of Mr. IKEA who has figured out a way to repeatedly and painfully victimize me into wasting my precious Saturday mornings and hard earned money on obtaining new items in a profound fashion.

Once being bribed and convinced of the need to uproot myself from a once pleasant weekend morning, the journey starts way too early with a couple of pushes on the i(kea)-phone in order to take a taxi (via Grab app) to the IKEA penitentiary.

Let the root canal begin.

Once arriving at the ant colony, I'm forced by the crowd down a narrow habit trail as the entrance slowly fades away behind me. This is about the time the equivalent to water boarding begins.  My senses become overwhelmed at the various lights, signs, products, chatter, etc. Blood pressure increases and breathing becomes laborious as I watch my fellow prisoners, who appear to be oddly enjoying this experience, load up their wheeled loot holders. The following hour or two is just a blur and it all runs together like bad water color painting.

I now prepare myself for the displeasure of temporarily being held hostage for a few hours by mood altering display nooks littered with unavoidable reduced pricing signs that have a Pavlovian effect on a certain gender of shopper. The slow motion action of one by one removing dollar bills from my wallet starts to play over and over in my head as I start to grow weary, sauntering down the path of least resistance.

Naturally all of this activity makes you hungry. Mr. IKEA does not want hungry prisoners so he has constructed a way to extract more money from each unsuspecting inmate. After finding a temporary place to store your gatherings you must divide and conquer. One of you must go secure and eating location while the other waits in a long line for a 1/2 hour minimum to obtain the food. If you do not time this right you may find yourself with nowhere to eat as the other prisoners do not care to part with thier places at the tables. Seasoned inmates know the routine. The ratio of food sold vs. places to sit are highly offset. Mr. IKEA does not care if you have to stand and eat so as long as you get enough calories in to finish the march of shame up to the check out line.

The post-meal second round of pain begins. I start to sweat as I'm lead back into general population. It's an apprehensive aggravation type of sweat. After all, I'm spending MY time and MY money as the painfully obvious becomes inevitable. My shopping cart is getting fuller the farther I wade into the abyss of consumables. At this point I'm seemingly unable to escape this insanity. This explains why there are no windows from which to make a freedom leap.

As I continue to serve out my sentence for hours while being inundated by "on sale" signs and dimmed lighting displays that tap into one's emotional side, I now start to sympathize with my captor. It is now that I get the pleasure of waiting in a long line to exchange my hard earned cash for items in my cart.

I take a sigh of relief as I feel like the finish line is within reach. The light at the end of the tunnel is growing larger.

In hindsight, I wish my future self could time travel back to my current self, tap me on the shoulder and say, "Go to Starbucks instead", or "say you have to work", or "pretend your wallet was stolen yesterday", then miraculously find it Monday morning, or fake an injury.

After waiting in what seems to be the 10th line of the day, an Aussie mate must have seen the steam leaving my now crimson colored face, when he taps me on the shoulder and says, "Hey mate, they serve cold beer right over there".

Read the rest of the story at:
https://singaporehighlights.blog

How to: Milwakee Sawzall Blade Change out for Dummies

A reciprocating saw is a wonderful tool and I've used them for thousands of handyman DIY construction and repair tasks over the years. This is a must-have for the power tool collection. Even though to many, it may be blatantly obvious how to change out a blade, it may not be to others or beginners. The first thing, like any other power tool blade or wheel change out operation, unplug the damn thing. I've seen a lot of injuries and almost got a few myself for being stupid or careless and not taking the simple step of unplugging the tool before changing out the blade, wheel, or bit. Once unplugged, you'll need an Allen wrench that fits the Allen head set screw in the reciprocating head. Typically these come with one but many of us lose these things. Loosen the set screw and the blade will come out. Many new models of reciprocating saws have quick disconnect style fittings on them so no wrench may be necessary depending on the model you have. Grab your fresh blade and place it back into the same position and insert it into the slot. Then tighten the Allen head set screw. You are now good to go.

If you don't have one or need a new one, here is a link on amazon to have one delivered: https://amzn.to/34AejAA

DIY IKEA Brand "OMAR" Model Wire Storage Racks-Basic Assembly Directions

As much as I despise setting foot in IKEA having to deal with the crowds and  navigate through the habit trail of items that we can live without but must have, these wire rack shelves are actually pretty nice. The model style or type is called "OMAR". Assembly time is less than 15 minutes or so per section of shelf. The nice thing about these is that you assemble them and purchase them one section at a time which lends to their versatility. They have engineered these wire racks to not be too cumbersome and to hug the wall as much as possibly without any wasted space. They are a most efficient use of space. Practically anyone can put this thing together with zero tools. The only thing you will potentially need a few tools for is securing this to the wall. Securing it to the wall is important and probably overlooked many times but once you start assembling and stacking more than one section of these shelves they can become top heavy and a safety hazard. So I do recommend you secure these to the wall especially if you have young ones around who would find shelving units such as these a perfect structure for climbing.

Out of all of the shelving units I've assembled in my life, these are probably the easiest. I have some experience with these in the past as Costco used to sell them and maybe they still do. They were a little more costly than these but they were also more robust. One thing I did like was that they give you an extra shelf clamp as part of each kit just in case one doesn't snap in perfectly (which would result in the shelf being useless) or if one breaks for becomes lost. Anything extra in kits of any kind of item these days is a rarity so this is appreciated and even more so if needed to be used. You will also find yourself with an extra set of adjustable feet if you decide to stack your shelves. I set these aside in case I wanted to ever use the units separately in the future. Truth be told, I will probably lose the adjustable feet by the time I ever re-realize that the shelves come back apart in two pieces and can be used separately. 

How to make a Pallet Wood Trash Can

This pallet wood trashcan project was super fun to make. The beauty of making pallet projects is that you can totally goof them up, which I have, and you aren't out of a bunch of money. It really puts the fun fun factor back into wood working and takes the pressure off. Not only are these great from a practical standpoint but they make really good gifts as well. Each one is guaranteed to turn out unique.
In order to properly obtain your raw materials you will need a simple set of tools for pulling the boards apart and extracting the nails. My favorite two tools to use is a hammer and a crow bar. I use a Cobalt brand one. Here's a link to the type of hammer and crow bar I use for this task.

I also used a brad nailer and compressor. This makes it nice you can "tack" your pieces together with one hand while holding them with the other. The drawback is that you need to make sure you are shooting your brad nails nice and straight so they don't go through your thumb and also so they don't protrude from the wood.