DIY Pallet Project: Shop Table From Pallets-Repurposed Wood Made Into Us...

In this DIY Pallet Project: Shop Table From Pallets "How to" video, I take you step by step through my process on using old pallet wood to create a shop table. For the Table top, the first step was to get all my slats separated, get the nails pulled out, and clean them all up. I cut them all to the same length and placed them on two longer aluminum clamps. Pipe clamps work well here too. Once I get them square, flat, and straight, then I took two perpendicular lengths of wood and drilled and screwed them up through the bottom to hold it all in place. I then drilled and screwed 4 equal legs on. I then cut a couple of blocks for extra reinforcement, drilled, and screwed those on as well in between the legs and the cross members on the underside of the pallet table surface. I custom made the metal angle iron brackets as well. I had some old metal bed rails laying around so I sectioned them up and drilled holes in them to facilitate screws and used them for reinforcing brackets. I used some repurposed lag bolts to secure these. I sanded the top surface of the table so it was nice and smooth and flat. I decided that I needed a shelf down below for extra storage so I hit up my pallet pile again. I pulled off some more slats carefully so as not to crack or break the boards in the process. I got the nails all pulled out and cut to length on the table saw. I used some of these for the trim around the top of the table so it had a nice finish. I then created the second shelf down below using more pieces from the pallet pile and nailed them together with a brad nailer.
Tools used:
Table Saw: https://amzn.to/31W6epw
Cordless Drill: https://amzn.to/31WRgiO
Brad Nailer: https://amzn.to/30UA50b
Air Compressor: https://amzn.to/35ftvop