DIY Homemade Pallet Firewood Wood Storage Bin-Repurposed Pallet Wood Tur...

In this DIY Homemade Pallet Firewood Wood Storage Bin-Repurposed Pallet Wood video I demonstrate how to simply construct a useful and practical all weather log seasoning rack. Since I used so many pallet slats for other projects I had many of the big pallet cross member pieces left over. Typically I would slice them up into burnable pieces and use them for getting my fire started as they are great for this. In this case I needed racks in which to store all of my firewood so these were just what I needed. So I started sorting them out and getting 4 that were nearly identical to start out with and then of course pulling the nails out of pounding them in. In some cases I had to knock them off to the side and pound them flush. The reason to start out with 4 that are identical is so the sides will be close to equal height. For the bottom all you'll need is two that are nearly identical. The top is less important as long as you have pieces that are long enough as you can trim the top or even use slats if you have long enough ones. As far as the nails go, whenever I pulled them I tried to staighten them if needed and save them for future use. In this case I was able to reuse them for building these things. After sorting the pieces I laid them out on the ground in a "U" shape making two identical parts right next to each other. The bottom portion of the "U" gets nailed together to the side pieces. Once the two identical parts are constructed I stacked them on top of one another. I then used some pallet slats as securing pieces to hold the two modules together. After standing the pieces upright I completed the square by nailing the top portion on. This adds strength to the side pieces when storing firewood and also adds to the visual appeal. These are nice to make because they are free and also you can make as many as you want and stack them next to each other in a nice organized fashion without the fear of your firewood falling over. It also makes it easier to secure a tarp to it if you need to keep it dry.



www.diy-technician.com

DIY Chicken Egg Laying Bin Station built from Re-purposed Pallet Wood

From my scrap pile of extra pallets I need to make a DIY Chicken Egg  Laying Bin Station built  from Re-purposed Pallet Wood. My chickens are now laying eggs to they need they're own area in which to be comfortable, relax, and do some laying. I broke down a few pallets and I removed all of the nails with my pry bar and hammer. I was able to reuse a few of the nails. It's always fun to use the brad nailer so I secured everything with it. Once the nails were removed I lined up the now new raw materials (pallet slats) and then nailed down a couple end pieces to secure them all together and then one across the middle. This piece will act as the bottom. I did the same thing for the back piece. Just made an "L" shape with the wood then also nailed some side on it and then a front piece as well. The chickens were a little standoffish at first but once I put some bedding in there they took to it really nicely and played some eggs.



www.DIY-Technician.com

DIY Pallet Project-Simple Wall Mounted Pallet Paint Shelf Organizer

With some simple hand tools and a free old pallet you can make an up cycled DIY Pallet Project-Simple Wall Mounted Pallet Paint Shelf Organizer in no time flat. When choosing pallets, if I have the option, I try to pick ones that have all of the slats in good shape and also I like to pick the ones that are a little heartier. It's not always an option and often times I've had to just settle with what I can get. It is never a waste though because if a pallet just went to hell when I was taking it apart, I'd just use it for firewood to generate heat. If I didn't use it in the fireplace I could use it for outdoor burning in the firepit. Pallet wood burns quick and lights up nicely prepping a good coal bed to toss some longer burning logs on. So, in making this wall mounted pallet shelf I easily cut my pallet roughly in half, using the middle cross member as my cut line so it was nice and straight. I wanted it a little smaller so I sectioned it off once again basically making a smaller rectangle out of the bigger one. This left me with a section of pallet containing four cross members. I then took my hammer and pryer and carefully removed every other wooden slat. I used one of those wooden slats as bottom piece for this shelf. I even removed as many nails as I could and straightened the salvageable ones for reuse. No use in tossing out a perfectly good nail. I then took my cordless drill and a few drywall screws and mounted this sucker to the outside of my shed. After I mounted it I cut some bottom pieces for the leftover scraps for the bottom portion of the upper shelf on this fixture. This worked out perfectly for my storage needs.

Tools used:
Handsaw: https://amzn.to/2BBD4Ag
(Optional)Skillsaw: https://amzn.to/2P9VJLJ
Crowbar: https://amzn.to/2MCjeuZ
Cordless Drill: https://amzn.to/2P9VTCP
Hammer: https://amzn.to/2N6XE0H

How to make a Vertical Pallet Garden-Simply Done Pallet gardening Project

How to make a Vertical Pallet Garden-Simply Done Pallet gardening Project-Instructional "how to" style video with detailed step by step procedural instructions for making a vertical pallet garden for almost free. An old trampoline mat was used at the backing for this but you can use landscaping plastic sheeting, felt, garbage bags, or whatever else you can think of just to sort of hold the soil in from the back. I tried to use all recycled materials that I had laying around as part of the fun. After cutting to size I nailed the trampoline mat with some roofing nails I had left over. I had quite a few roofing nails that needed to be put to good use so I was liberal with their use on the backside of my newly constructed free vertical pallet garden. In this example I planted some strawberries that I had already started. They took off great and made for a nice crop. This project worked really well and is recommended if you have space restrictions you are concerned about. This would also work really well for flowers or an herb garden.

DIY Pallet Planter Box-Raised Beds for Gardening

I found myself with quite the collection of pallets just begging to be used for a project. I planned on a garden the year I made some raised beds. Once I knocked all of the nails out of the pallet boards I tried to reuse as many of the nails as I could. Some of them required a little bit of straightening. Be careful when cutting pallets on a table saw for the inherent risks that accompany using this saw but also because many times there are nails buried inside the wood that you don't readily see from the outside. I've hit a few nails with the table saw and you know it when you hit one. This project was relatively simple, just created the bottom square then nailed some vertical side pieces in. After that I just went around and nailed all of the boards to the vertical side pieces. Once I had it flush with the top I cut some boards for the trim at 45 degree angles in the corners for a specific look. I decided not to paint them but as an idea you could paint them the same color as your house, shed, or barn. In this project I had some extra boards so I created a bottom for this but really there is no need if you don't plan on moving them. They are super heavy when they are full of dirt anyway. Not only that but once you start watering whatever plants go in there the boards are going to start rotting. I had some triangular pieces left from one of the pallet disassemblies so they were a perfect fit for the bottom corners. You can't go wrong using pallets to make your planter boxes.

Tools used:

Table Saw: https://amzn.to/31W6epw

Cordless Drill: https://amzn.to/31WRgiO

Brad Nailer: https://amzn.to/30UA50b

Air Compressor: https://amzn.to/35ftvop

DIY Pallet Project: Shop Table From Pallets-Repurposed Wood Made Into Us...

In this DIY Pallet Project: Shop Table From Pallets "How to" video, I take you step by step through my process on using old pallet wood to create a shop table. For the Table top, the first step was to get all my slats separated, get the nails pulled out, and clean them all up. I cut them all to the same length and placed them on two longer aluminum clamps. Pipe clamps work well here too. Once I get them square, flat, and straight, then I took two perpendicular lengths of wood and drilled and screwed them up through the bottom to hold it all in place. I then drilled and screwed 4 equal legs on. I then cut a couple of blocks for extra reinforcement, drilled, and screwed those on as well in between the legs and the cross members on the underside of the pallet table surface. I custom made the metal angle iron brackets as well. I had some old metal bed rails laying around so I sectioned them up and drilled holes in them to facilitate screws and used them for reinforcing brackets. I used some repurposed lag bolts to secure these. I sanded the top surface of the table so it was nice and smooth and flat. I decided that I needed a shelf down below for extra storage so I hit up my pallet pile again. I pulled off some more slats carefully so as not to crack or break the boards in the process. I got the nails all pulled out and cut to length on the table saw. I used some of these for the trim around the top of the table so it had a nice finish. I then created the second shelf down below using more pieces from the pallet pile and nailed them together with a brad nailer.
Tools used:
Table Saw: https://amzn.to/31W6epw
Cordless Drill: https://amzn.to/31WRgiO
Brad Nailer: https://amzn.to/30UA50b
Air Compressor: https://amzn.to/35ftvop

DIY Pallet Shoe Rack Organizer

This video provides Step by step instructions on how I made a DIY Pallet Shoe Rack that lasted for years for FREE!

After hand selecting which pallet I wanted to use I gathered up the necessary few tools I thought I would need. I didn't want the shoe rack to be too high so I but the pallet right in half with my hand saw. I also needed it to be limited to a certain width based on where I wanted to install it so I cut 1/3 of it off, widthwise with a skilsaw. Although I switched to a power tool here, you could do it all with a handsaw.

I then took my crowbar and hammer and removed the lower board. This gives me a top row for shoes and then a bottom row as well. I blew it all down with my air compressor to remove the saw dust.I then secured it to the wall with a couple of screws. Quick, easy, and free shoe rack organizer. You can paint it or have one of you kids paint it too for for an added custom touch.





Hand Saw: https://amzn.to/2nnuzWd

Crow Bar: https://amzn.to/2LSvlns

Cordless Drill: https://amzn.to/2pSseU7

Skilsaw: https://amzn.to/35aaV0R

Air Compressor: https://amzn.to/2OrJU34

Air Compressor Hose: https://amzn.to/2McblLm

Air Nozzle: https://amzn.to/35eBS3l



https://the-avant-garden.blogspot.com

https://diytechnician.tumblr.com

www.diy-technician.com



#pallets, #projects, #DIY, #wood, #woodworking, #DIYTechnician, #shoerack, #organizer

DIY Pallet Project: How to make a Pallet Playhouse

Reduce, Reuse, and Recycle! Upcycling materials for useful projects is most fulfilling. In this case the ground work foundation was laid with old pallets and the 2 X4's were pulled from an old building that was torn down. The tarpaper and shingles were left over from when I put a new roof on my house. Pallets are easy to come by and pull apart. I was actually able to obtain a bunch of nails when I  pulled them apart as well. A couple of them I had to straighten with my hammer on a flat surface.

Sorry for the horrific music. I was messing around on my acoustic and seemed like a good idea at the time to use it as a soundtrack. Most pallet projects are made to look a little rough so you can make most of them with standard electric and hand tools.

This playhouse was a joy to build. It got a lot of use by mine and the neighborhood kids. Once they grew out of it, it became a chicken coup that held numerous chickens that layed us many many fresh eggs. I even ended up making some egg laying boxes out of pallets for the chickens.

Once the chickens were gone it became a lawn and garden shed where I stored all my oils, gas, paint, tools, yard tools, etc. If you like pallet projects check out my youtube channel as I have a ton of DIY pallet projects.

If, after watching my DIY pallet playhouse construction video, you don't want to build one yourself, than maybe you can purchase one of the below.

Pallet Project: How to make a Pallet Playhouse

How to make a Pallet Wood Trash Can

This pallet wood trashcan project was super fun to make. The beauty of making pallet projects is that you can totally goof them up, which I have, and you aren't out of a bunch of money. It really puts the fun fun factor back into wood working and takes the pressure off. Not only are these great from a practical standpoint but they make really good gifts as well. Each one is guaranteed to turn out unique.
In order to properly obtain your raw materials you will need a simple set of tools for pulling the boards apart and extracting the nails. My favorite two tools to use is a hammer and a crow bar. I use a Cobalt brand one. Here's a link to the type of hammer and crow bar I use for this task.

I also used a brad nailer and compressor. This makes it nice you can "tack" your pieces together with one hand while holding them with the other. The drawback is that you need to make sure you are shooting your brad nails nice and straight so they don't go through your thumb and also so they don't protrude from the wood.