DIY How to Create a Swedish Fire Torch | Outdoor Long Burning Log Round

In my DIY How to Create a Swedish Fire Torch | Outdoor Long Burning Log Round" video I show you how to quickly and easily make a fire log project. I'm reposting this video after having found it in my archives. I had deleted it from an earlier youtube endeavor a few years back. The idea of a Swedish torch itself was not mine, however, after watching some videos on it back in the day I figured I'd make my own version using my trusty Stihl chainsaw. These are a lot of fun to make and burn for a solid couple of hours + depending on what kind of wood you are burning. This was just a round of fir but I could only imagine how much burning time you would get out of a round of a hardwood like oak or even madrone (I call them madrona).  You can use a chainsaw but you could also use a bucksaw or handsaw to make one. You could do this camping or if you are able to, in your back yard.



Amazon Link to Husqvarna Chainsaw: https://amzn.to/2Wv4H87



Woodcutting Safety Pants: https://amzn.to/3dfJTs1

DIY Welding Fabrication Project: Freestanding Metal Fire Pit from Refrid...

This was a very fun welding fabrication project.  Although I had a couple fire pits this one fit really well onto the back patio for use making smaller fires. My neighbor, who is an automotive mechanic, gave me an old empty coolant container. Knowing I was a welder who liked to tinker and weld junk metal together, he always brings me interesting parts to make stuff from.

I made sure it was empty by drilling a hole into the top first just to be sure there wasn't anything left in it. Using an electric corded angle grinder I cut the top off the container. There was a weld seam around it that I used as a guide or cut line.  I had some 1/4" wide flatbar laying around that I bent into a circle matching the same diameter as the tank. The flatbar was very soft so I was able to bend it by hand and weld the end together. Using the same size flatcar, I cut 4 riser pieces approximately 6" long and ground the mil scale off the ends to shiny metal. This makes a better surface to weld. I then welded those risers to the bottom larger portion of the container. I then welded the circular flatbar piece to the 4 risers. This portion is in an effort to create somewhat of an access or viewing window to the flames that will live inside the tank as well as create a seat for the top lid to set upon. I had some wire mesh laying around to it seemed natural to cut out a section and wire tie it to the viewing window (access) portion of the fire pit. I would have like to weld it in place but it's too thin so I decided to use metal wire instead. I drilled holes to for which to run the wire through and secure it in place.

For the legs, I had some rebar laying around so it seemed like a good idea to use these to bring it off the ground a bit. While welding these it's important to focus your heat on the rebar as the tank wall is very thin. If you sit on the tank wall too long or apply too much heat to it, you'll blow right through the wall. I tacked them all in place first and didn't get in a hurry thereby keeping them cool before proceeding to weld more.

I had some other bent round stock laying around so it seemed like a good use for some handles to move the thing with. I cut and welded those on in the same fashion as the legs.

I went and purchased a can of high heat paint for the local hardware store and applied a couple coats. I was very happy with the results. The guitar playing is me just messing around as these videos are an excuse for me to play and use it for theme music.