Troy Bilt 4 cycle 30cc Weed Wacker Unboxing Assembly and Use

For years the old lawn edgers "weed wackers" would run really good when you first purchased them and then once you let them sit for various periods of time between lawn mowing sessions, it would be hell getting them started. I've seen more weed wackers tossed across lawns in my time than homelite chainsaws. The older ones had 2 cycle motors and if you didn't have exactly the correct oil/gas mixture the weed wacker would either not start, smoke the whole place up, or the motor would bog down. I have experienced all of this first hand being starting at a young age watching my father fight these evil little machines and then also myself as I grew up mowing lawns for extra money and then of course my own.

Not only was the motor an issue on the older weed wackers but the line feed mechanism on the working of the contraption often wreaked havoc on the operator's emotion. I would venture to say that no matter what kind of weed wacker you owned back in the day, you probably had both the line feeder mechanism and/or the motor apart on it (except maybe a Stihl) before the first year of ownership was up. The older models made it pretty tough to change out the line or even replace it if it got stuck up inside the feeder mechanism causing much frustration and chewing up your clock.

The frustration caused by the old weed wackers could make a preacher swear. Ok maybe not out loud but inside. I've called these things every name in the book and have probably set the distance record for yards thrown.

Not only were the old motors an issue on the older weed wackers but the line feed mechanism on the working end of the contraption often wreaked havoc on the operator's emotions. I would venture to say that no matter what kind of weed wacker you owned back in the day, you probably had both the line feeder mechanism and/or the motor taken apart on it (except maybe a Stihl) before the first year of ownership was up. The older models made it pretty tough to change out the line or even replace it if it got stuck up inside the feeder mechanism causing much frustration and chewing up your clock. There was no youtube or internet readily available at your fingertips, you either had to figure it out or toss it.

I can't count how many times that I would wake up the next day with a very sore and stiff upper back and then at first wonder what I did to it the day before. Then it dawns on me. Oh that's right, I tried starting that damn weed wacker by pulling on the pull starter 2000 times over the course of the day yesterday. Then it lingers for the next couple days just for good measure.

It is my opinion that Troy Bilt has gone above and beyond the call of duty with their latest models and helped out us lawn warriors.

DIY Welding Fabrication Project: Freestanding Metal Fire Pit from Refrid...

This was a very fun welding fabrication project.  Although I had a couple fire pits this one fit really well onto the back patio for use making smaller fires. My neighbor, who is an automotive mechanic, gave me an old empty coolant container. Knowing I was a welder who liked to tinker and weld junk metal together, he always brings me interesting parts to make stuff from.

I made sure it was empty by drilling a hole into the top first just to be sure there wasn't anything left in it. Using an electric corded angle grinder I cut the top off the container. There was a weld seam around it that I used as a guide or cut line.  I had some 1/4" wide flatbar laying around that I bent into a circle matching the same diameter as the tank. The flatbar was very soft so I was able to bend it by hand and weld the end together. Using the same size flatcar, I cut 4 riser pieces approximately 6" long and ground the mil scale off the ends to shiny metal. This makes a better surface to weld. I then welded those risers to the bottom larger portion of the container. I then welded the circular flatbar piece to the 4 risers. This portion is in an effort to create somewhat of an access or viewing window to the flames that will live inside the tank as well as create a seat for the top lid to set upon. I had some wire mesh laying around to it seemed natural to cut out a section and wire tie it to the viewing window (access) portion of the fire pit. I would have like to weld it in place but it's too thin so I decided to use metal wire instead. I drilled holes to for which to run the wire through and secure it in place.

For the legs, I had some rebar laying around so it seemed like a good idea to use these to bring it off the ground a bit. While welding these it's important to focus your heat on the rebar as the tank wall is very thin. If you sit on the tank wall too long or apply too much heat to it, you'll blow right through the wall. I tacked them all in place first and didn't get in a hurry thereby keeping them cool before proceeding to weld more.

I had some other bent round stock laying around so it seemed like a good use for some handles to move the thing with. I cut and welded those on in the same fashion as the legs.

I went and purchased a can of high heat paint for the local hardware store and applied a couple coats. I was very happy with the results. The guitar playing is me just messing around as these videos are an excuse for me to play and use it for theme music.