DIY Exterior Home Window Shutters Made Inexpensively With Metal Accents ...

You can use cedar fence slats like I did or you can also use pallet wood. I made a few pairs of these using 5 1/2" wide by 6' long by 5/8" thick pieces purchased from Lowe. I had to spend some time sanding them but it was well worth it. We used popsicle sticks to get the proper and even spacing. This was a good excuse for me to also pick up some dewalt clamps to build these. Although I used my craftsman cordless brad nailer to put these together, you could use screws or even hand nail them together. I'll post the link to the decorative metal pieces we hammered into the cross members of the shutters. These were quick, cheap, and easy to make. Clavos Nails, Premium Grade, 1 1/2 inch Diameter, Matte Black Powder Coat Finish (20) https://a.co/d/isfKMB1 Stuck or need help? Call me right now and show me your problem: http://paltap.me/DIYTechnician. Please feel free to contact me directly if you need a hand or this isn't the exact answer that you need!

DIY Wood Floor Repair Project | Cheap Quick Fix | Wood Filler Putty and ...

The wood just inside this sliding glass window has taken a beating from sunlight and moisture. It really needs to be replaced. So much so that it is starting to show signs of rot and is giving way at some of the edges. Rather than try to refinish it or replace it right now, this wood putty fix was just what was needed for a cheap and quick repair job. If I was the owner I would not have it get as far damaged as it did and would have refinished it. It's possible it's still salvageable but definitely needs to be resealed to prevent further damage. For this band-aid type of quick fix I just used some wood filler putty, both light and dark and tried to come close on a color match but was unsuccessful so I used a furniture touch up marker to bend it in so the repair didn't stick out as much.

Katzco Furniture Repair Kit Wood Markers - Set of 13 - Markers and Wax Sticks with Sharpener - for Stains, Scratches, Floors, Tables, Desks, Carpenters, Bedposts, Touch-Ups, Cover-Ups, Molding Repair: https://amzn.to/2PHE2Ch
Visit www.diy-technician.com

DIY How to Unclog a Bathroom Sink | Super Easy Method

In this video I got through the steps on unclogging a bathroom sink. Many times the problem can be a super easy fix that will require you to get your hands dirty. This will save you a couple hundred bucks though. In the case presented in this video I was able to unclog this bathroom sink just using a pair of cheap hemostats. I'll post the link to some below but I must say, they are well worth what you may pay for them as they have many uses and I've used them to unclog numerous sinks over the years along with many other uses on various jobs.



Link to hemostats on amazon: https://amzn.to/2YnpNGy

DIY Welding Project: How to Weld an Ornamental Iron Folding Easel for Pa...

I made this video "DIY Welding Project: How to Weld an Ornamental Iron Folding Easel for Painting or Picture Display" for fun for my daughter's painting display. You can really make some cool decorative easels using different pieces of decorative metal. These are fun to make. I've made and sold many of them in the past. This one was just a basic model and wanted to keep it simple. Easy welding project and they last forever. Easy to fold up and store when not in use as well.

Amazon link to heavy duty easel: https://amzn.to/2xFXTfC

Amazon Aluminum Easel: https://amzn.to/2WsqWeU

Chain Link Fence to Cedar Plank Fence | Metal to Wood Interface Corner Fence Joint Intersection

I have a chainlink fence up one side and a cedar fence perpendicular to it. I had to tie the two in together at the corner. The the use of some modified galvanized chain link fence brackets was was able to bolt the bracket (galvanized steel end band) onto the chain link fence while securing to the fence with some washers and screws.The galvanized steel end bands came from Lowe's but you can typically get them at any store that sells chain link fences. Galvanized Steel End Bands: https://amzn.to/34mwhrV

DIY How to Grill Mangoes | What's better than a Mango? | Answer: Another...

My love for mango's can only be shown here when I throw them on the barbie and grill them up. I added no extra ingredients and their natural sugars came out and the result was delicious. If you really want to spice this process up:
1. Coat with Sliced Mangos with Melted Butter
2. Sprinkled with Brown Sugar or Regular Sugar
3. Cayenne Pepper for a kick at the end

You won't be disappointed either way. Grilling these mangos is a nice addition to your menu for either just yourself of when entertaining friends. Follow the three steps above to really set this off.
Grill from Amazon: https://amzn.to/349gCvX

Phillips Air Fryer-Frozen Hot Chicken Party Wings Super Quickly Prepared

Watch my amazing Phillips Air Fryer-Frozen Hot Chicken Party Wings Video. Quickly prepare wings more than ever before. This must-have appliance is an essential part of my kitchen now and I highly recommend it be part of yours. This comes in so handy when it's nasty outside and don't feel like grilling. It's great when I want the crispness of an fried or oven cooked chicken wing yet will have the speed of a microwave. For the meal prepared in this video I used some pre-seasoned wings. They were called wings of fire. I put them right into the air fryer frozen. I made sure that I didn't stack them but gave enough room around each one so they could cook properly. This contraption is so easy to use it's unbelievable. Just put the wings in, adjust your cooking temp setting,  and push the button. You will have fresh crispy party wings in record time. I use this for hamburgers, fries, veggies, pork chops, and many other things. For this particular dish, I ate these tasty treats with some homemade ranch dressing and a couple sticks of celery. I used some Franks Red Hot Buffalo Wing sauce on the side too.

The clean up at the end is so easy as well. There is a non stick surface under the removable cooking screen that makes for ease of food removal in no time flat.

Link to air fryer: https://amzn.to/2VXe6nH

How To Fix a Leaky Toilet

This job started when I got notified about water on the floor. It would get cleaned up with a towel but show back up again. It would get worse after every flush of the toiled. I checked for the quick and easy stuff first. The toilet wasn't continually running, meaning, the float inside was good. I checked really good around the water supply valve, it's associated hose, and it's connection to the toilet. All of this was bone dry. This meant one thing,  Toilet was leaking around the base. This meant I had to perform the following steps to pull the toilet and replace the wax ring:



Step 1: Turn off the water to the toilet

Step 2: Flush remaining water in the bowl

Step 3: Disconnect water supply hose

Step 4: Remove the two caps over securing nuts on toilet base

Step 5: Unthread the two securing nuts

Step 6: Pull (remove) the toilet

Step 7: Remove old wax ring remnant

Step 8: Install new was ring

Step 9: Re-install toilet onto new wax ring



Here's a wax ring kit:

https://amzn.to/2RKA9it

DIY Bath Showerhead Installation Tutorial "How To" Style Video

This "How TO" Step by Step Tutorial on replacing your bathroom shower head head shows you an easy beginner homeowner style process that you can do yourself without the headache or expense of calling someone else to do it for you. Follow along with me while I perform this DIY Bath Showerhead Installation Tutorial "How To" Style Video and you can get rid of that old showered in no time flat after you (or likely your wife) have picked out the ideal showered from the Lowe's, Home Depot, or other home/hardware store.

The first step is to turn off the main water supply. This is a great opportunity to locate your main water supply shut off to the house if you haven't found it already. You don't want to wait until there's a huge  flood from a burst pipe to attempt to locate your main shut off. Once you've secured your water at the main shut off valve you should go ahead and start carefully unthreading your old shower head. It's a really good idea to use two wrenches on this to apply counter torque as you don't want your connection inside the wall spinning. So ideally you would hold the elbow coming out of the wall completely still with slight torque in the tightening direction while you unthread your old shower head connection. Once you've carefully removed the old one now bust out your brand new one and get all your parts played out and pre-assembled as much as possible. Put some teflon tape on the end of the connection coming out of the wall. This will keep water from spraying all over the place when you turn it back on. Be sure your new shower head has the rubber gasket installed before threading it on. Now thread it on. Be sure your connections are tight and turn on the water supply. Good luck!

Amazon Showerheads: https://amzn.to/2Nd3cYS, https://amzn.to/2PSwwpc, https://amzn.to/2oKNzhV

https//www.diy-technician.com

What does Cambodian currency (Riel) look like

DIY Pallet Shoe Rack Organizer

This video provides Step by step instructions on how I made a DIY Pallet Shoe Rack that lasted for years for FREE!

After hand selecting which pallet I wanted to use I gathered up the necessary few tools I thought I would need. I didn't want the shoe rack to be too high so I but the pallet right in half with my hand saw. I also needed it to be limited to a certain width based on where I wanted to install it so I cut 1/3 of it off, widthwise with a skilsaw. Although I switched to a power tool here, you could do it all with a handsaw.

I then took my crowbar and hammer and removed the lower board. This gives me a top row for shoes and then a bottom row as well. I blew it all down with my air compressor to remove the saw dust.I then secured it to the wall with a couple of screws. Quick, easy, and free shoe rack organizer. You can paint it or have one of you kids paint it too for for an added custom touch.





Hand Saw: https://amzn.to/2nnuzWd

Crow Bar: https://amzn.to/2LSvlns

Cordless Drill: https://amzn.to/2pSseU7

Skilsaw: https://amzn.to/35aaV0R

Air Compressor: https://amzn.to/2OrJU34

Air Compressor Hose: https://amzn.to/2McblLm

Air Nozzle: https://amzn.to/35eBS3l



https://the-avant-garden.blogspot.com

https://diytechnician.tumblr.com

www.diy-technician.com



#pallets, #projects, #DIY, #wood, #woodworking, #DIYTechnician, #shoerack, #organizer

How to install window screens on house windows

Step by step tutorial in the basics of installing a window screen. The side with the thin metal springy clips attached to it goes in first. The plastic tabs go inward as it makes it ever so slightly tougher to remove from the outside. The trick to getting all four corners inserted is to get three corners in first leaving one slightly out, then the fourth and final corner will barely slip in. In this example I put the right two corners in first because they had the metal spring tabs on them, followed by the upper left corner, then finally the bottom left corner.

Not sure if this is any good: https://amzn.to/34XDKNl

www.diy-technician.com

How to Unclog a Bathroom Sink and How to Remove Sink Drain Stopper

n this video I discuss and demonstrate a method of unclogging your backed up bathroom sink. I start with the least invasive and try to unclog the bathroom sink by using a pair of hemostats to fish out any debris around the drain as this is sometimes the only fix you need to do. This was not the case in this instance of this plugged up drain. The sink stopper needed to come out. This means the up and down mechanism must me disassembled. This is done by going underneath the sink and unthreading the fitting that secures the up and down joint. Once unthreaded it can be pulled out. Now there is a hole in the pipe so if you run your water anymore it will run out the hole all over the place. Now you can remove the stopper from up above. In this instance there was some debris down inside the drain that needed to fished out. After removing all the debris that was reachable I reassembled the parts. The sink was still not unclogged though so I had to disassemble again. I decided to give it the water pressure treatment with the garden hose as I've had many successes in the past using this same method. Once I flushed whatever was plugging it down the drain with the hose pressure, I reassembled all the parts. What you want is a whirlpool or eddy look of the water as it goes down the drain. If it bubbles or gurgles a bit then it means something is impeding the water flow and it's still plugged.
Ultimate Hemostat Kit: https://amzn.to/2Hj5PVX

Welding Fabrication Project-New Metal Framed Shed Door Build

GMC Sierra DIY Drive Shaft Removal Procedure

GMC Sierra DIY Drive Shaft Removal Procedure. This whole video was made due to my truck being stuck in gear. Tried everything to get it unstuck but nothing worked. Had to get it out of the way so it was necessary to remove the drive shaft and pull it out of the way.

If this happens to you or you need to disconnect your drive shaft for other reasons, then this video is for you. It's actually very easy and can be done with simple hand tools. 

The first thing I did was jack up the track and place jack stands under it so I didn't get crushed. 

Secondly, I disconnected it at the rear differential joint. This was easily removed by loosening the 4 bolts shown using a 7/16" socket. 

Before completely removing them I made sure to tie up the drive shaft so it didn't smack me in the face. I used a flathead screwdriver to pop off the little clips around the universal joint and the retaining rings. Once these are removed the drive shaft comes right out. 

Pretty simple. I did end up buying a new universal joint as the old one was a little rusty. It was fairly inexpensive at auto zone. 

Amazon link to new U-joint: https://amzn.to/2Hdz5gw

DIY Mongoose Mountain Bike 21 Speed-Basic Assembly "for dummies"

DIY "How To" | The Correct Way to Fillet a Sea Bass-Maximize your Fillet...

KastKing Fillet Knife 9 Inch, Professional Level Knives for Filleting Fish, Boning Meat And Processing Any Food.

DIY Troy-Built Riding Mower Blade Sharpening Tutorial-Sharpen that Dull ...

Thanks for checking out my DIY blog here. Well the first thing you have to do is figure out how to get the the mower safely off the ground without having it fall on you. The best way is to use a lift of some kind but definitely if nothing else, use some jack stands for safety. Once off the ground you'll need two wrenches so you can apply counter torque to the bolt and nut holding the blade on.
Loosen the long bolt and nut that holds it in place and this will allow the blade to come free. Once you get the blade off, secure it to a saw horse and bust out your grinder. Every good DIY technician has a hand held grinder. Then put your handiwork to the test and hone a new edge on that mower blade.

After you sharpen your blade, reinstall it, and get cut your lawn for the first time, you will be so happy as it's just like cutting the grass with a brand new mower. You will also take extra precautions not to hit rocks, dirt, sticks, plastic bottles, kids toys, and baseballs just to see what they look like chopped up.

If you are tired of pushing a mower around the yard, save yourself a bunch of time and have a little fun by buying one of these mowers below on amazon. Or hell, upgrade to a new one.

Troy Bilt Lawnmower Unboxing Assembly and Usage Model 421854

Project Source Brand Overhead Ceiling Light Fixture Installation-Model#0...

This Project Source brand overhead house light is fairly easy to put it in especially if its just a swap out for and older one. Just like in this case the existing wires and hole were already there.
The very first thing you want to make sure you do is turn off the power. Use a volt meter to verify that the power is off before you start as well just to make sure you've got the correct circuit. One thing I like to do as an added safety measure is to turn off the light switch as well. This way, if you've turned off the wrong circuit and happen to get unlucky enough to get a faulty volt meter, than you've got a third barrier from you getting shocked.