This "How TO" Step by Step Tutorial on replacing your bathroom shower head head shows you an easy beginner homeowner style process that you can do yourself without the headache or expense of calling someone else to do it for you. Follow along with me while I perform this DIY Bath Showerhead Installation Tutorial "How To" Style Video and you can get rid of that old showered in no time flat after you (or likely your wife) have picked out the ideal showered from the Lowe's, Home Depot, or other home/hardware store.
The first step is to turn off the main water supply. This is a great opportunity to locate your main water supply shut off to the house if you haven't found it already. You don't want to wait until there's a huge flood from a burst pipe to attempt to locate your main shut off. Once you've secured your water at the main shut off valve you should go ahead and start carefully unthreading your old shower head. It's a really good idea to use two wrenches on this to apply counter torque as you don't want your connection inside the wall spinning. So ideally you would hold the elbow coming out of the wall completely still with slight torque in the tightening direction while you unthread your old shower head connection. Once you've carefully removed the old one now bust out your brand new one and get all your parts played out and pre-assembled as much as possible. Put some teflon tape on the end of the connection coming out of the wall. This will keep water from spraying all over the place when you turn it back on. Be sure your new shower head has the rubber gasket installed before threading it on. Now thread it on. Be sure your connections are tight and turn on the water supply. Good luck!
Amazon Showerheads: https://amzn.to/2Nd3cYS, https://amzn.to/2PSwwpc, https://amzn.to/2oKNzhV
No comments:
Post a Comment