Showing posts with label plumbing. Show all posts
Showing posts with label plumbing. Show all posts

Wednesday, June 10, 2020

DIY How to Unclog a Bathroom Sink | Super Easy Method



In this video I got through the steps on unclogging a bathroom sink. Many times the problem can be a super easy fix that will require you to get your hands dirty. This will save you a couple hundred bucks though. In the case presented in this video I was able to unclog this bathroom sink just using a pair of cheap hemostats. I'll post the link to some below but I must say, they are well worth what you may pay for them as they have many uses and I've used them to unclog numerous sinks over the years along with many other uses on various jobs.



Link to hemostats on amazon: https://amzn.to/2YnpNGy

Thursday, May 7, 2020

How to Unclog a Kitchen Sink Drain in Singapore | No P-trap Under Sink



The Singapore under sink plumbing set up is different than what I've seen in the states for the most part. This set up is pretty nice in many ways but also seems to clog up more frequently than most of the standard US p-traps I'm used to dealing with. This is really nice in the sense that when it does clog up you just put your water catch basin under the sink and unscrew the receptacle, dump it out, and screw it back on. Really a great set up if you ask me. The problem I saw was that it leaked no matter how tight I tightened it by hand once it was full of food waste debris.



Here's some good plumbing/unclogging tools to have:



Amazon link to sink snake: https://amzn.to/35qyiDR



Amazon High Pressure Nozzle with Shut off: https://amzn.to/3d6yBX5



Amazon Plunger: https://amzn.to/3d8BaYN



Amazon Unclogger/Grabber: https://amzn.to/2ybx3wm



Amazon Hemostats: https://amzn.to/2SrDj9T

Saturday, December 28, 2019

DIY How to Replace Kitchen Sink Faucet Spout Filter (Aerator)-Make New A...



Kitchen sink spout spraying all over? Not getting enough water flow from the sink faucet? It's likely the faucet spout filter is clogged. In this tutorial I show you the simple process for accomplishing just that. I didn't realize it until I removed the old one that it needed to be replaced with a new one. This won't be the case all the time as you may just be able to clean the old one off of sediment, plastic, etc and reinstall it. In my case, the filter was damaged therefore not doing it's job. I do filter all of the water but this screen holds back the big particulates. I couldn't believe how much crap had built up on my filter. I'm surprised it flowed as well as it did. Amazing how much stuff is in our water. Changing this thing out is simple. Mine takes a 22mm wrench. Take the 22mm wrench (or vice grips if you don't care about the finish) and turn it counter clockwise to loosen. Once off, clean it all off and inspect for damage. If damaged, then replace. If still good, reinstall. The screen that I removed did not have a gasket but luckily the new one came with a gasket. If you are going to get a new one I recommend you take the old one to the hardware store with you to match it up. Pull it out of the package in the store and be sure it's the correct size and thread pitch. There is not a huge risk here for the most part as many of them are standard size. I believe the technical name for these is a sink faucet aerator.



Order from amazon: https://amzn.to/2rC7SQd


Sunday, November 17, 2019

How To Fix a Leaky Toilet



This job started when I got notified about water on the floor. It would get cleaned up with a towel but show back up again. It would get worse after every flush of the toiled. I checked for the quick and easy stuff first. The toilet wasn't continually running, meaning, the float inside was good. I checked really good around the water supply valve, it's associated hose, and it's connection to the toilet. All of this was bone dry. This meant one thing,  Toilet was leaking around the base. This meant I had to perform the following steps to pull the toilet and replace the wax ring:



Step 1: Turn off the water to the toilet

Step 2: Flush remaining water in the bowl

Step 3: Disconnect water supply hose

Step 4: Remove the two caps over securing nuts on toilet base

Step 5: Unthread the two securing nuts

Step 6: Pull (remove) the toilet

Step 7: Remove old wax ring remnant

Step 8: Install new was ring

Step 9: Re-install toilet onto new wax ring



Here's a wax ring kit:

https://amzn.to/2RKA9it

Monday, November 4, 2019

DIY Bath Showerhead Installation Tutorial "How To" Style Video



This "How TO" Step by Step Tutorial on replacing your bathroom shower head head shows you an easy beginner homeowner style process that you can do yourself without the headache or expense of calling someone else to do it for you. Follow along with me while I perform this DIY Bath Showerhead Installation Tutorial "How To" Style Video and you can get rid of that old showered in no time flat after you (or likely your wife) have picked out the ideal showered from the Lowe's, Home Depot, or other home/hardware store.

The first step is to turn off the main water supply. This is a great opportunity to locate your main water supply shut off to the house if you haven't found it already. You don't want to wait until there's a huge  flood from a burst pipe to attempt to locate your main shut off. Once you've secured your water at the main shut off valve you should go ahead and start carefully unthreading your old shower head. It's a really good idea to use two wrenches on this to apply counter torque as you don't want your connection inside the wall spinning. So ideally you would hold the elbow coming out of the wall completely still with slight torque in the tightening direction while you unthread your old shower head connection. Once you've carefully removed the old one now bust out your brand new one and get all your parts played out and pre-assembled as much as possible. Put some teflon tape on the end of the connection coming out of the wall. This will keep water from spraying all over the place when you turn it back on. Be sure your new shower head has the rubber gasket installed before threading it on. Now thread it on. Be sure your connections are tight and turn on the water supply. Good luck!

Amazon Showerheads: https://amzn.to/2Nd3cYS, https://amzn.to/2PSwwpc, https://amzn.to/2oKNzhV



https//www.diy-technician.com

Wednesday, August 21, 2019

How to Unclog a Bathroom Sink and How to Remove Sink Drain Stopper



n this video I discuss and demonstrate a method of unclogging your backed up bathroom sink. I start with the least invasive and try to unclog the bathroom sink by using a pair of hemostats to fish out any debris around the drain as this is sometimes the only fix you need to do. This was not the case in this instance of this plugged up drain. The sink stopper needed to come out. This means the up and down mechanism must me disassembled. This is done by going underneath the sink and unthreading the fitting that secures the up and down joint. Once unthreaded it can be pulled out. Now there is a hole in the pipe so if you run your water anymore it will run out the hole all over the place. Now you can remove the stopper from up above. In this instance there was some debris down inside the drain that needed to fished out. After removing all the debris that was reachable I reassembled the parts. The sink was still not unclogged though so I had to disassemble again. I decided to give it the water pressure treatment with the garden hose as I've had many successes in the past using this same method. Once I flushed whatever was plugging it down the drain with the hose pressure, I reassembled all the parts. What you want is a whirlpool or eddy look of the water as it goes down the drain. If it bubbles or gurgles a bit then it means something is impeding the water flow and it's still plugged.
Ultimate Hemostat Kit:
https://amzn.to/2Hj5PVX


Sunday, February 17, 2019

DIY Shower and Bath Tub Drain Unclog-Drain Surgery




Shower drains get plugged up all the time especially if you have girls in the house. One must get the fine art of unclogging drains down to a science unless you'd prefer to foot the bill for someone else to come and do it. A good DIY technician should be able to get this job done in under a half and hour depending on severity. A good pair of hemostats is very handy for this job but if you don't have hemostats, do not worry as either needle nose pliers or even tweezers will work. Ideally, the water will be drained when you are working on this but many times you'll find yourself working in standing water. In this case the water slowly drained so I could at least stand above where I was working. The trick here is to take of this problem once the drain starts draining slowly, NOT when the drain completely quits draining. So, once you have the drain plug unscrewed (turn counter clockwise to unthread), then take your extraction tool and start to slowly remove the nasty hair and whatever else is attached to it from the drain. Repeat until the drain is free of any foreign material and is like new. Test to ensure proper drainage before walking away. In most situations similar to this there is an accompanying odor that you'll notice so you may want to have some kind of small trash receptacle nearby for which to deposit your removed debris. Good luck fellow DIY Technicians.

Saturday, December 22, 2018

DIY Fix Bathroom Faucet High Pitch Squealing While Turning Water On- QUI...


This can go on and on for months and even years if you don't do something about it. I always like to stop from the top down approach. Meaning, easiest to hardest or less invasive to most invasive in hopes to find the problem right off the bat or not as far down the line. This was a very easy fix fortunately. It appears the screen in this faucet was doing exactly what it was designed to do. There were some small plastic chips sitting just inside it which was causing it to squeal or whistle. It was readily apparent once I removed the spout's screen. If you are going to use vice grips, you may want to put some kind of barrier in between the teeth of the vice grips and the spout filter receptacle so as not to leave teeth marks in it when done. Sometime a rag or towel will do the trick.
It's very fulfilling and satisfying when you can make someone's life a little bit easier by helping them or fixing something that isn't quite working the way it should. If you have an old faucet like the one in the video you may want to consider an upgrade like one of these below.