DIY Instructions-How to Install an Automatic Ice Maker in Your Refrigera...

How to Install and Automatic Ice Maker. This installation was for a Frigidaire brand. IMEZC000 model. Automatic Ice Maker Installation kit. After unboxing the ice maker, you'll notice that there is an electrical connector that needs to be hooked up. Keep that in mind. The ice maker will need an on demand water supply so you'll need to run a water line to the fridge. Almost all models nowadays have a standard hook up in the back of the fridge for this. When I did this, I removed the thread protectors from the fridge connection and used teflon tape around the threads. Then I hooked up the hose, turned on the water and checked for leaks. In this video you'll notice my incoming water valve demonstrates some leaking while operating the valve. Once it's either in the fully open or fully closed position, the leak stops. I did end up replacing this valve just for the purposes of upgrading it and made another video on it as well. After the water connection at the fridge was satisfactorily checked for water leaks, I pushed the fridge back into it's spot. Now it's time to mount the ice maker. The electrical connections are uncovered inside the the freezer. There are some plastic screw hole protectors in the side of the freezer that need to be removed to allow for the mounting screws to be inserted. Then I inserted the mounting screws that come with the ice making kit. Don't screw them in all the way. Pull out your ice maker and plug the electrical connection into the receptacle in the freezer. Also there is a plastic ice slide that needs to be installed as shown in the video. After plugging in the electrical connection I hung the ice maker onto the mounting screws and then drove them in all the way to secure it to the side wall of the freezer. I then plugged the fridge back in had ice in no time flat. This ice maker installation was so easy.



Link to similar ice maker on amazon; https://amzn.to/2JUTwRO