DIY Easy SecurityTag Removal Process-Quick Detachment Method

DIY Easy Security Ink Tag Removal Process-Quick Detachment Method. Extra care must be taken with regards to safety when using this method as the clothing item could easy get wrapped around the grinder and you could lose a finger or a hand. This method is not recommended for the Ink capsule style tags as the ink will spray everywhere if it gets ground into by the pedestal grinder. All proper safety precautions must be observed when using this method. Better yet, I recommend you do not use this method as it's highly dangerous. I chose to use this method as I live far away from the mall and didn't want to make a trip all the way back there to have to bother with the holiday driving, parking, crowds, waiting in line a the store, just to get this tag removed so for me it was easier to do it myself. This actually worked really well and didn't cause any damage to myself or the piece of clothing that I bought. I just ground the whole thing off a little bit at a time and it only took a few minutes.

Rare earth magnets: https://amzn.to/39V4mAl

Ferrari Brand Bottle Tree-Home Brew Post-Sanitizing Bottle Drying Rack

This is a must-have if you are into home brewing and bottling. It allows you to wash and sanitize your bottles then place them in such a manner that allows the water to run out without the bottle being disturbed and falling over. A friend and fellow home brewer of mine showed me this thing and uses it all the time. What a great little effective contraption . The price you pay for this is well worth the convenience of it and the assembly on this was as easy as you get as well.

Here's the link to it: https://amzn.to/2DlBdAy


#bottle, #tree, #beer, #ferrari, #homebrew, #craft, #bottletree, #bottledryer, #sanitize, #wash, #sanitize, #clean, #rinse, #sterilize, #bottling, #beverage, #brewer

DIY Homemade Fishing Gummy Luers-Melt and Mold Kit by FusionX

Demonstration on how to make your own homemade fishing gummy worms right in your kitchen. This kit was made by fusionX fishing lures. The plastic stuff is called plastisol which is a thermoplastic resin used for making soft plastic fishing lures. It can be remelted and poured numerous times with no negative impacts to material properties. It has a melting point of between 320 degrees F and 350 degrees F. It's quite prone and sensitive to overheating and will scorch causing it to turn brownish and then be deemed unusable. Remember these completed lures on not edible. Upon heating the plastisol will begin to turn clear and gel, and then become thin similar to the consistency of syrup. IF the liquid plastisol is not heated to a hot enough temperature and past the gel stage it will stay soft and gummy will not setup properly. Be sure to follow all of the safety precautions such as gloves, safety glasses, apron, long pants, long sleeve shirt, fave shield protective shoes etc.

The plastisol can be melted over a stove however this can quickly lead to overheating.



Molds should be kept dry and clean. You can clean the molds with warm water and mild detergent if needed.



Amazon link to kit: https://amzn.to/2nt2ywf