DIY Easy SecurityTag Removal Process-Quick Detachment Method

DIY Easy Security Ink Tag Removal Process-Quick Detachment Method. Extra care must be taken with regards to safety when using this method as the clothing item could easy get wrapped around the grinder and you could lose a finger or a hand. This method is not recommended for the Ink capsule style tags as the ink will spray everywhere if it gets ground into by the pedestal grinder. All proper safety precautions must be observed when using this method. Better yet, I recommend you do not use this method as it's highly dangerous. I chose to use this method as I live far away from the mall and didn't want to make a trip all the way back there to have to bother with the holiday driving, parking, crowds, waiting in line a the store, just to get this tag removed so for me it was easier to do it myself. This actually worked really well and didn't cause any damage to myself or the piece of clothing that I bought. I just ground the whole thing off a little bit at a time and it only took a few minutes.

Rare earth magnets: https://amzn.to/39V4mAl

DIY Kwikset Door Handle and Dead Bolt Installation

In this "How To" DIY Kwikset Door Handle and Dead Bolt Installation, I take you step by step through the installation process after I replaced my front house door to an upgraded model.

 This was a first of it's kind for me as the handle was a little bit different style than what I'd done before. It'd still turned out though.

The first thing you'll want to do is remove all your parts from the package then lay them out on a table or the floor next to your door.

Take the door knob insert and test fit it into it's hole in the door and make sure you know which way it's supposed to face depending on which way the door swings and closes. In this demo I did a test run on how the handle mechanism operates outside of the door prior to installing just so I understood and could see what was going on with the thing. I put the insert and the large handle portion in the door loosely. The smaller handle portion needs some assembly.

Now loosely assemble the rest of the parts in the door as shown. Tighten the smaller door handle first via the Allen head set screw. Now go ahead and tighten everything down.



www.diy-technician.com



Tools you'll need for this job:

Cordless driver or manual Phillips screwdriver: https://amzn.to/31S3OIi



Allen wrenches: https://amzn.to/3396IZz

Kwikset Door Knob and Dead Bolt Installation Instructions

DIY How to Install DEFIANT Brand Bright Outdoor Motion Detector LED Lights

Amazon link: https://amzn.to/2LIfadC
These DEFIANT brand motion security lights are incredibly easy to install. They were around $50 each at Home Depot. They really made this install very simple and they are soooo bright that it hurts your eyes to look at them. I was very pleased with the ease of installation as well as results and functionality of them serving their purpose well. Be sure to turn off the power to the circuit before working on any of this. A voltage tester is always a good thing to have around. Reminder to check the batteries and on/off function of your voltage tester before using. After you get your old outdoor light off the wall and unwired, you'll need to also remove the threaded piece of flat bar/sheet metal bracket as the new LED motion sensor light has it's own unique piece with an inset threaded center oriface that needs to be installed. The same original two screws can typically be used if need be. If the old ones are worn than be sure to replace them. A lot of times they make these screws stainless steel whereas a lot of times in the past they were galvanized. Even though they are galvanized they still get corroded and sometimes very bad.
Once you get the bracket and back plastic holder plate installed be sure the wiring is run through hole. Now the next step is the one that I really like. There's only one screw for the ground wire but then there's some set screws for the black and white wires. The kit comes with a little red flathead screwdriver. I wish they would have made the handle on it a little fatter and the screwdriver a little longer as it's almost too tiny to handle. Regardless, the back plate has two set screws that secure the wires. Secure the wires and tighten the set screws and give the wires a tug to make sure they are secure. If the wires are loose this can be catastrophic due to an electrical fire to be sure you are mindful and focused on what you are doing.
Once the wires are secure and screwed in, now it's time to snap on and screw in the front main body section of the fixture.



 Aside from being a semi-serious creative outlet, this DIY Technician Youtube channel serves many purposes. It acts as somewhat of a historical log or portfolio of past work. It also allows me to make a tiny amount of money with both Adsense and Amazon. The tiny Amazon profits come from you clicking through my link provided (such as this one: https://amzn.to/2JZqIqW) and then either ordering the item or ordering another item after clicking the amazon link. I know the experts recommend staying in a certain niche, and I'd say I do that for the most part, however, I don't like to put self imposed limits on what I post. It stays more interesting for me this way. I take great pleasure in fixing things as well as trying new foods, helping others, and visiting new places. I really appreciate and enjoy the education that youtube has to offer. It's still amazing to me how you can learn how to do almost anything with just a few clicks and some watch time. Almost all of the videos I post are not just for the purposes of posting videos, they are documentation of activities and fixes I was going to do regardless. So I figured that since I'm performing these tasks anyway, might as well have fun making some videos and maybe make a nickel or two. Blog: https://the-avant-garden.blogspot.com

DIY Install & Unbox Dummy Home Security Camera -Wali Electric Brand

Wali electric brand dummy security cameras ordered off of amazon. This step by step tutorial takes you through unboxing and simple installation. These dummy security cameras look real and can assist you in your home security plan acting as a deterrent for potential thieves. These professional looking dummy security cameras can be installed in less than 5 minutes. Its a good idea to install them in a manner that is high enough so they are out of reach. The AA batteries that they require to make the red blinking LED keep blinking are not included with each assembly and must be purchased by you separately. You will need an electric or cordless drill to secure it to the wall as well as three screws. I used some 1.5” drywall screws. Overall these dummy cameras alone won’t necessarily deter all potential thieves however when used in conjunction with bright motion detector lights, secure windows and security doors they can be an integral part of maybe making the thieves think about picking an easier location.

How to Remove Security Ink Retail Clothing Tags-DIY Tutorial

There are many ways in which to remove these pesky retail security tags and I've been able to remove them using a few different methods. Often times, especially during holiday seasons, clerks often overlook the removal of these due to the crowds etc. So by the time you finish your shopping and drive home the last thing you want to do is turn around and drive back to the store where you purchased your item and have them remove it. The video above demonstrates the removal of a tag using a rotary tool or rotary file. Dremel makes a nice one and so does craftsman. I'll post some links below to some of these as they are not only useful in performing this job but I've used them for numerous other things.

The video above demonstrates on an old shirt what happens when the ink capsules of the security ink tag are popped and released onto the cloth. There's no mistaken what's taken place once the ink pours out and of course the garment is ruined.

The video above demonstrates the removal using an angle grinder. I admit this method of removal is somewhat overkill, however, it can be done if it's all you have. Your risk of damaging the clothing item goes up a little but if you are careful this method can be super quick and easy. Don't have an angle grinder? You should get one as they are useful for so many other things. I'll post a couple links below. I've used my angle grinders for cutting metal, tile, wood, you name it.



The below video demonstrates the bench grinder removal method. I think out of all of the methods shown this has got to be the easiest for this type of tag. I allows great control of the depth of plastic removed at a time allowing you to carefully peel away small amounts in a controlled fashion. There is some danger involved here though. Make sure any loose parts of the garment are secure as there could be a high tendency for this to wrap around the bench grinder. Same goes with the methods shown above. Know what your doing and be able before you go trying this or you could lose a finger or two.