How to Unclog a Kitchen Sink Drain in Singapore | No P-trap Under Sink

The Singapore under sink plumbing set up is different than what I've seen in the states for the most part. This set up is pretty nice in many ways but also seems to clog up more frequently than most of the standard US p-traps I'm used to dealing with. This is really nice in the sense that when it does clog up you just put your water catch basin under the sink and unscrew the receptacle, dump it out, and screw it back on. Really a great set up if you ask me. The problem I saw was that it leaked no matter how tight I tightened it by hand once it was full of food waste debris.



Here's some good plumbing/unclogging tools to have:



Amazon link to sink snake: https://amzn.to/35qyiDR



Amazon High Pressure Nozzle with Shut off: https://amzn.to/3d6yBX5



Amazon Plunger: https://amzn.to/3d8BaYN



Amazon Unclogger/Grabber: https://amzn.to/2ybx3wm



Amazon Hemostats: https://amzn.to/2SrDj9T

DIY How to Replace Kitchen Sink Faucet Spout Filter (Aerator)-Make New A...

Kitchen sink spout spraying all over? Not getting enough water flow from the sink faucet? It's likely the faucet spout filter is clogged. In this tutorial I show you the simple process for accomplishing just that. I didn't realize it until I removed the old one that it needed to be replaced with a new one. This won't be the case all the time as you may just be able to clean the old one off of sediment, plastic, etc and reinstall it. In my case, the filter was damaged therefore not doing it's job. I do filter all of the water but this screen holds back the big particulates. I couldn't believe how much crap had built up on my filter. I'm surprised it flowed as well as it did. Amazing how much stuff is in our water. Changing this thing out is simple. Mine takes a 22mm wrench. Take the 22mm wrench (or vice grips if you don't care about the finish) and turn it counter clockwise to loosen. Once off, clean it all off and inspect for damage. If damaged, then replace. If still good, reinstall. The screen that I removed did not have a gasket but luckily the new one came with a gasket. If you are going to get a new one I recommend you take the old one to the hardware store with you to match it up. Pull it out of the package in the store and be sure it's the correct size and thread pitch. There is not a huge risk here for the most part as many of them are standard size. I believe the technical name for these is a sink faucet aerator.



Order from amazon: https://amzn.to/2rC7SQd

How to Unclog a Bathroom Sink and How to Remove Sink Drain Stopper

n this video I discuss and demonstrate a method of unclogging your backed up bathroom sink. I start with the least invasive and try to unclog the bathroom sink by using a pair of hemostats to fish out any debris around the drain as this is sometimes the only fix you need to do. This was not the case in this instance of this plugged up drain. The sink stopper needed to come out. This means the up and down mechanism must me disassembled. This is done by going underneath the sink and unthreading the fitting that secures the up and down joint. Once unthreaded it can be pulled out. Now there is a hole in the pipe so if you run your water anymore it will run out the hole all over the place. Now you can remove the stopper from up above. In this instance there was some debris down inside the drain that needed to fished out. After removing all the debris that was reachable I reassembled the parts. The sink was still not unclogged though so I had to disassemble again. I decided to give it the water pressure treatment with the garden hose as I've had many successes in the past using this same method. Once I flushed whatever was plugging it down the drain with the hose pressure, I reassembled all the parts. What you want is a whirlpool or eddy look of the water as it goes down the drain. If it bubbles or gurgles a bit then it means something is impeding the water flow and it's still plugged.
Ultimate Hemostat Kit: https://amzn.to/2Hj5PVX

DIY Fix Bathroom Faucet High Pitch Squealing While Turning Water On- QUI...

This can go on and on for months and even years if you don't do something about it. I always like to stop from the top down approach. Meaning, easiest to hardest or less invasive to most invasive in hopes to find the problem right off the bat or not as far down the line. This was a very easy fix fortunately. It appears the screen in this faucet was doing exactly what it was designed to do. There were some small plastic chips sitting just inside it which was causing it to squeal or whistle. It was readily apparent once I removed the spout's screen. If you are going to use vice grips, you may want to put some kind of barrier in between the teeth of the vice grips and the spout filter receptacle so as not to leave teeth marks in it when done. Sometime a rag or towel will do the trick.
It's very fulfilling and satisfying when you can make someone's life a little bit easier by helping them or fixing something that isn't quite working the way it should. If you have an old faucet like the one in the video you may want to consider an upgrade like one of these below.