DIY How to Properly Clean to Sound Metal In Preparation For Welding [Wel...

How to Charge Your Streetbike Motorcycle Battery Tutorial Demonstration [Motorcycle Battery Charge]

                                                10mm

                                                10mm

                                                Left on charger overnight. Good to go by morning.

DIY How to Easily Fix Your Garden Bow Rake Tutorial Demonstration {Garde...

How to Operate a Vermeer Brand Rented Chipper BC 600 Model [Vermeer Chip...

How to Start a Honda Shadow V-Twin 1100CC Motorcycle [Honda Shadow]

DIY Cub Cadet Trailer Flat Tire Change Out Simple Basic Tutorial [Cub Ca...

Cub Cadet Riding Mower  trailer tire flat? See how easily change it out in my  "DIY Cub Cadet Trailer Flat Tire Change Out Instructional Simple Tutorial [Cub Cadet Trailer Tire]" video. The tires that come stock with this trailer contain a tube. Due to the elements and heavy use the tube can start to get dry rot which is what happened on this one. Finally there was a huge hole by the valve stem, which, at that point the hole is so big that fix a flat won't work. I wasn't able to readily find a tube for this in a hurry (I needed to use it right away) so I purchased a brand new tire for it. It was a 15" tire. The ones that come stock on there are 6" wide but they were out of 6" when I went to tractor supply to buy a new one so I went with the 5" wide ones. Worked like a charm and now this trailer is back in business.

Here's a paid amazon link to some lawn tractor tires:

MaxAuto 2 Pcs Lawn Mower Tires 15x6.00-6 with Wheel for Riding Mowers, 3" Offset Hub Long with 3/4" bearings(WILL NOT FIT ON TRAILERS): https://amzn.to/32oN25w

Here's a paid link to some good tunes for Greta Van Fleet

The Battle At Garden's Gate: https://amzn.to/3dupgvi

DIY Quick and Easy Pallet Garden Planters FREE with Minimal Tools Tutori...

DIY Full Bathroom Remodel Top to Bottom From Start to Finish [DIY Bathro...

DIY Shiplap on Bathroom Walls "How-to" Style Tutorial Video for Restroom...

In my "DIY Shiplap on Bathroom Walls "How-to" Style Tutorial Video for Restroom Upgrade Remodel [Shiplap]" video I first started out by buying large 4 X 8 sheets from Lowe's. Got them home and ripped them into 8" wide strips with a table saw. This was a two person job due to the flex in the somewhat thin sheets. Once I ripped them all into 8" strips it was time to start hanging them. I made the smaller cuts with a chopsaw or also known as a miter saw. I secured them to the wall with my craftsman battery powered brad nailer which made it really easy. I used nickels and washers for spacers in my gaps in an attempt to keep them as even as possible. Once it was all done we painted it all and then caulked. Step by step explanations complete with pictures at my website here: https://www.diy-technician.com/post/diy-shiplap-on-bathroom-walls-how-to-style-tutorial-video-for-restroom-upgrade-remodel CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1): https://amzn.to/2PsxoTG DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779): https://amzn.to/3skDow5 RYOBI 15 Amp 10 in. Expanded Capacity Table Saw With Rolling Stand: https://amzn.to/3vSgzC5 PORTER-CABLE 20V MAX Oscillating Tool with 11-Piece Accessories, Tool Only (PCC710B): https://amzn.to/3fn6ckb

DIY Farmhouse Style Pallet Wood Deck with Repurposed Treated Wood Fence ...

Cheap and easy DIY Farmhouse Style Pallet Wood Deck with Repurposed Treated Wood Fence Post Cut Offs [Pallet Deck] "How to" style instructional step by step tutorial. The first thing I did was dig out the area a little bit so I could place my bricks level as well as the correct depth so the top of the deck would be the same height at the porch. While digging this out I made a very cool find. An old  axe head!! Looking forward to the refurb on it. Once I got the area dug out I placed the bricks for all four corners at the correct depth as well as level. Then I put the old treated wood fence post cut offs in place on top of the bricks as the foundation. I then made sure they were square before I tacked them in with a brad nailer simply to hold them in place enough to start placing the pallet slats on top for the decking. Now it was time to measure and cut the pallet slats for the cross members for the the top decking. Once the pallets slats were all installed I installed some border trim on the edges for edge protection as well as a more finished look. Then it was basically done aside from filling the dirt back in around it and staining it. I used some used motor oil as stain and it gave it a nice look. I always like the idea of reusing old materials that may have otherwise gone to the landfill and reusing them giving them a fresh and useful new life.

Check out my website: https://www.diy-technician.com

Woodworker's Treasure Chest: 

https://b51238owaxdtfzc52ejrvrcub7.hop.clickbank.net/

Link to my wife's poshmark: 

https://posh.mk/E4zpllwsGcb

Free shipping on first order if you mention DIYTechnician!

Some of the tools I used (paid links):

SKILSAW SPT77W-01 15-Amp 7-1/4-Inch Aluminum Worm Drive Circular Saw: https://amzn.to/2OTG5WH 

DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779): 

https://amzn.to/3ucBSxp

How to Clean your Gas Grill BBQ with Super Clean Making it Look Just Lik...

Make that old nasty grill look spic and span just like a new grill. My old gas grill needed to be cleaned badly. I thought I'd try Super Clean on it and it did the trick! I disassemble the racks, the burner covers and of course the small and large drip pans from this Char Broil brand grill. I use this thing quite a bit for cooking as well as use it for parties etc so it's nice to have it in "like new" condition. The Super Clean acted as an amazing cleaner and degreaser leaving a nice shiny surface on the stainless steel as well as the powder coated black colored metal portions. It worked really well with almost no effort on the plastic portions as well. I found the trick for maximizing the liquid is to let it sit on there for a minute or two before lightly scrubbing or wiping it off with paper towels.

Get some here on amazon! (paid link):

Super Clean Foaming Multi-Surface All Purpose Cleaner Degreaser Spray, Biodegradable, Full Concentrate, 32 ounce

https://amzn.to/3tnGMGD

DIY FREE Homemade Pallet Porch BBQ Table from Slats of Pallet Wood [Pall...

DIY Pallet Keepsake Box | Rustic Vintage Looking Woodworking Project Tut...

DIY Pallet Keepsake Box | Rustic Vintage Looking Woodworking Project Tutorial [Pallet Keepsake Box]

Step by step pictures with detailed explanations here at my website (please visit!!!): 

https://www.diy-technician.com/post/diy-pallet-keepsake-box-rustic-vintage-looking-woodworking-project-tutorial-pallet-keepsake-box

Here the nailer I used on amazon (paid link):

CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1)

https://amzn.to/3cfL3oM

Ryobi Table Saw Blade Change Out | Dull Blade? Slow Board Cuts? Crooked ...

The Ryobi Table saw blade that came with the saw had seen one too many nails during my pallet project board ripping operations and was in serious need of a change out. Join my on my first stab at  changing out the blade on this. I got lucky and actually picked up a brand new blade for cheap at a second hand store. Perfect for my use as my likelihood of ripping through a nail is pretty high.

The number one thing to do is make sure the saw is unplugged, above all else. Next is locating the spanner wrenches that come with the saw. They've conveniently got a place for them on the underside of the main deck of the saw. Just be sure to return them there once you are done with the change out.

Step by step instructions with pictures and detailed explanations at my website:

https://www.diy-technician.com/post/ryobi-table-saw-blade-change-out-dull-blade-slow-board-cuts-crooked-cuts-ryobi-saw-blade

Here's a link to one on amazon (paid link):

DEWALT 10-Inch Miter / Table Saw Blades, 60-Tooth Crosscutting & 32-Tooth General Purpose, Combo Pack (DW3106P5):

https://amzn.to/2Owj6AE

DIY Bar Stool Butcher Block Pallet Project and Reused Bed Wood Bed Rails...

For this rustic looking bar stool project I used a variety of recycled materials. I had some extra left over butcher block material I used for the seat portion and also an old wooden bed rail that was due to go on the bonfire for the legs. Pallet slats were used for the trim around the seat and the foot rest around the legs.

DIY Pallet Footstool FREE | Easy Woodworking Pallet Project from Recycle...

Basic step by step simple construction demonstrated here in my "DIY Pallet Footstool FREE | Easy Woodworking Pallet Project from Recycled Wood [Pallet Footstool]" video. I ended up staining and painting the trim on this later. One of the pallets I harvested lent itself nicely to footstool or small bench legs. I was able to re-use pallet nails for this after tacking it together with my brad nailer. 

I make two footstools in this video.

Step by step instructions with pictures and explanations at my website: https://www.diy-technician.com/post/diy-pallet-footstool-free-from-recycled-pallet-wood

DIY Pallet Project Free Standing Garden Bed Built Free from Discarded Pa...

DIY Pallet Wood Project Buffet Table for Entry Way [Pallet Buffet Table]

DIY Pallet Planter Easy Raised Garden Bed Project From Repurposed Pallet...

DIY Pallet Project: Easy Raised Garden Bed From Repurposed Pallets [Pallet Raised Bed]. The first thing I did was secure my building supplies by harvesting a pallet. I heavily relied on my chopsaw for this project. I then created two identical (same size} frames from the pallet slats. Once they were done, I stood them uprights so they were positioned parallel to each other. I then ran pallet slats vertically from one frame to the other until I had all four sides covered. I used my craftsman 18Gauage brad nailer extensively for this project as well. Once the sides were complete I trimmed out the top with basically another frame with 45 degree cuts in the corners of the pieces. I then used pre-stain (let dry for 30 minutes or so) and then walnut stained it. Easy and FREE!! Ready to plant some stuff in there now.

Pallet Projects at my website: https://www.diy-technician.com/post/10-diy-pallet-projects

Woodworker's Treasure Chest: 

https://b51238owaxdtfzc52ejrvrcub7.hop.clickbank.net/

Link to my wife's poshmark: 

https://posh.mk/E4zpllwsGcb

Free shipping on first order if you mention DIYTechnician!

Some of the tools I used (paid links):

SKILSAW SPT77W-01 15-Amp 7-1/4-Inch Aluminum Worm Drive Circular Saw: https://amzn.to/2OTG5WH 

DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779): 

https://amzn.to/3ucBSxp

DIY Wood Pallet Entry Way Sturdy Sitting Bench From Old Crate Pallet FRE...

DIY Wood Pallet Entry Way Sturdy Sitting Bench From Old Crate Pallet FRE...

Pallet project bench made from a discarded pallet into an upcycled and repurposed useful bench for an entry way (shoe tying bench),  porch bench or even as part of the general furniture population. The request for this came out of the need for a spot to sit down and take off your shoes when you come in the door or put on your shoes before leaving. These custom (every one is almost guaranteed to be different) are a blast to make and the supplies are as free as free gets.

Step by step pictures with detailed explanations can be found at my website: https://www.diy-technician.com/post/diy-wood-pallet-entry-way-sturdy-sitting-bench-from-old-crate-pallet-free-pallet-project-bench

Woodworker's Treasure Chest: https://b51238owaxdtfzc52ejrvrcub7.hop.clickbank.net/

Some of the tools I used (paid links):

SKILSAW SPT77W-01 15-Amp 7-1/4-Inch Aluminum Worm Drive Circular Saw: https://amzn.to/2OTG5WH

DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779): https://amzn.to/3ucBSxp

DIY Vintage Looking Coat Rack Repurposed From Old Bed Rails [DIY COAT RACK]

This DIY Vintage Looking Coat Rack Repurposed From Old Bed Rails [DIY COAT RACK] can also easily be done using repurposed pallet wood. I couldn't see tossing perfectly good pieces of thick wood away and had a request for a long coat rack. The timing was perfect. I took the old varnish off the bed rails with a dewalt brand 4" flapper disc and it worked like a charm. Once all the old varnish was removed I cut 45 degree matching bevels in the adjacent ends of the pieces of wood so they would fit together. I then pre-stained the fresh pieces of wood and let dry for about 45 minutes. I then stained them with walnut stain. Once the walnut stain was dry I measured the length of the coat rack and spaced the hangers out accordingly. I used my stud finder to find some the studs to screw into then screwed it to the wall. The customer was very happy with the results. This was a fun little unique project. I always get satisfaction from making stuff out of material that may have otherwise been thrown away. 

Step by step pictures with explanations of this project (and many others) at my website: https://www.diy-technician.com/post/diy-vintage-looking-coat-rack-repurposed-from-old-bed-rails-diy-coat-rack

Here's the discs I use to quickly remove the varnish from the old boards (paid link):

DEWALT DW8310 4-1/2" x 7/8" 120 Grit Zirconia Angle Grinder Flap Disc: https://amzn.to/3jQnoP9

Woodworker's Treasure Chest: https://b51238owaxdtfzc52ejrvrcub7.hop.clickbank.net/

Assembling and Using New RYOBI 10" Circular Table Saw with Folding Stand...

Unboxing, Assembling and Using this new RYOBI 10 Table Saw with Folding Stand. DIY "How-to" Tutorial Demonstration on power tool purchased from Lowe's.Unboxing, Assembling and Using this new RYOBI 10 Table Saw with Folding Stand. DIY "How-to" Tutorial Demonstration on power tool purchased from Lowe's. Needed a new one of these for my many DIY projects. Got tired of trying to rip boards with my handsaw. This is 100 times better. 

Step by step picture gallery with detailed explanations of the assembly of the new saw starting with the unboxing at my website: https://www.diy-technician.com/post/assembling-and-using-new-ryobi-10-circular-table-saw-with-folding-stand-ryobi-table-saw

I actually stopped by harbor freight to see what they had there and also what there prices were. All they had left in the the store was a single table saw and it was some off brand I'd never heard of before  and they wanted too much for what it was (more than what I paid for this saw). So I bumped over to Lowe's, saw this (no pun intended) and bought it. It's working out really well so far and I've used it a ton. I will say, I've tried to see how thick of a piece of wood I can cut with a 10" blade and it will not fully cut through a 4 X 4 treated piece of fence post. It gets close but won't cut all the way though the depth of it in the fully raised position so I'd say you are limited to a thickness of less than 4" but probably not too much over 3 1/4" roughly.

The saw comes with a blade guard that will keep your board from kicking back. It's made of plastic and can seem to be a hinderance when sawing some things but it's actually a nice safety mechanism for this saw. To get started I pulled the parts all out and played them out. There are two sides to the stand that are slightly different from each other. One is made to be the front of the saw. It goes together very nice. The saw comes with a hard plastic board pusher which I use all the time and well as a miter and spanner wrenches for blade change out.

DIY Old Garage Light Fixture Replacement with NEW LED Low Consumption [...

I recommend you hire a certified electrician to do this for you. I  made this video to show you how I did it LED light fixtures save greatly on your power bill as they are highly more efficient. Well worth the money spent to change them out. Not only do they use less power but they are brighter too!!! Old lights can be challenging to take out because you never know what is going to be on the other side or what the wiring configuration is until you take the fixture down and see what goes to where. In this case I there were three wires coming from the new LED light (green, white and black) which is standard for the most part, however, on the house....there was copper (same as green ground), white, black, AND red. Red is for the on/off switch in this case. So Black and Red are the "HOT" wires. 

Step by step pictures w/explanations and instructions at my website: https://www.diy-technician.com/post/diy-old-garage-light-fixture-replacement-with-new-led-low-consumption-led-overhead-light-upgrade

Link to my wife's poshmark: https://posh.mk/E4zpllwsGcb

Free shipping on first order if you mention DIYTechnician!

DIY Delta Showerhead Replacement | H20 Kinetic Power Drench from Lowe's ...

Full step by step pictures with explanation at my website: https://www.diy-technician.com/post/diy-delta-showerhead-replacement-h20-kinetic-power-drench-from-lowe-s-delta-showerhead-upgrade

DIY How to Reuse and Recycle Free Nails Pulled from Pallets [FREE PALLET...

Free pallet nails for free pallet projects are a blast. What makes this so good? To me there is satisfaction that comes from making something out of something that would have otherwise gone to the landfill or get wasted. Pallets are a hoot. Also the pallet cut-offs from projects are great for use in wood stoves and especially for backyard bonfires. It takes a little elbow grease to get some of them out and some are easier than others. A good claw hammer works as a nice tool for removing them but many times a nice crow bar or pry bar works the best and can also provide the most leverage. I like to use a combination of the two when harvesting pallets and nails from pallets. Some nails you pull from pallets are actually really nice and stout and just perfect for reuse and repurposing. The upcycling or repurposing of pallet nails takes a little extra time but when you get a decent collection of them and can make a project using those hard earned nails you pulled out, it really makes it that much better. Many times it will add to that popular rustic decorative look that many folks are after. Paid amazon link here for a steel pallet buster: Vestil SKB-DLX Deluxe Steel Pallet Buster with Handle, 41",blue: https://amzn.to/3rtzvUU Please visit my website: https://www.diy-technician.com and/or Support my channel here: https://www.patreon.com/DIYTechnician

DIY Pallet Project Doorbell Pallet Cover | Cover Exposed Ugly Wires [Fre...

Doorbell cover made from pallet wood covers up exposed doorbell fixture. Made for free! This was definitely a simple custom job that required some special DIY work. The wires are low voltage but just to be safe I lined the inside of the pallet box with flame retardant cement hearty backer. Once the box was fit up I pulled it back down I glued the hearty backer to the inside of the box then screwed a soda pop can tab to the top of the lightweight box in order for it to hook around the top of the fixture. Although not shown in the video, the box got painted the same color as the wall for blending in purposes. Please visit my website: https://www.diy-technician.com and/or Support my channel here: https://www.patreon.com/DIYTechnician Link to my wife's poshmark: https://posh.mk/E4zpllwsGcb Free shipping on first order if you mention DIYTechnician!

CAT Vehicle Battery Portable Combo Jump Starter with Air Compresor USB &...

This CAT Brand Vehicle Battery Compact Portable Jump Starter with Air Compresor USB and 110V Power [Dead Battery] will help you get yourself "unstranded". This compact and lightweight portable unit will not only jump you dead car battery to get you back on the road again but also provides a flashlight for operation in the darkness, USB port for charging your cell phone, air compressor if you have a flat tire or just need to blow up some sports balls (comes with needle too), and power for plugging things in. Great to also have around during power outages. The battery lasts quite a long time. In my video I demonstrate the various uses that this little unit provides. It also has a digital bar on the screen showing you how much battery life is left in it. To charge this back up all you have to do is plug it into the wall. CAT really did a fine job with this long lasting little yellow unit. Here's the amazon link (paid link): 3 in 1 - CAT Professional Power Station With Jump Starter & Compressor: https://amzn.to/2NRRfur Please visit my website: https://www.diy-technician.com and/or Feel free to donate: https://www.patreon.com/DIYTechnician

Archery Broadhead Arrow Vs. Paint Can, Egg, Apple, H20 Bottle [Slow Mot...

Archery Broadhead Arrow Vs. Paint Can, Egg, Apple, H20 Bottle, Polar Seltzer Water, Truly brand chick drink [Slow Motion Explosive Demolition Destruction]. Fun experiment done with a razor sharp broadhead on an old aluminum arrow shot out of a compound bow.

Tacoma Washington Warehouse Fire 3113 South Pine Street Building Collaps...

Tacoma Washington Warehouse Fire 3113 South Pine Street Building goes up in flames then Collapses [Large Blaze] near Goodwill Outlet Store. This was crazy. You could feel the heat from across the street. The brave Tacoma firefighters were amazing. They kept it from burning the power lines, nearby cars, and nearby buildings. The Tacoma police did a great job of getting the area blocked off. Was very unique to get a front row seat watching this. The sound of the building collapsing was eerie. Thankfully nobody appeared to be inside or injured.

DIY How to Change an Air Filter Yourself [Don't get ripped off by Quick ...

Air filter changeout is probably the easiest thing you can replace on a vehicle. Even if you don't change your own oil, don't get ripped off by these oil change places telling you that you need a new air filter. They overcharge you and most of the time you really don't need it to be changed out. All you need to do is stop by Wal-Mart or an auto parts store like Auto Zone etc. and grab a new air filter for the year, make and model of your vehicle. This is something you could do anywhere like even in the parking lot of the place you purchased it if you want. I will usually pick one up to have on hand when I'm purchasing my oil and oil filters. This demonstration tutorial was performed on an older 1998 Toyota Tacoma. Here's a link to this same type on amazon: FRAM Extra Guard Air Filter, CA6690 for Select Geo, Isuzu and Toyota Vehicles: https://amzn.to/2YtSzFX https://www.diy-technician.com Link to my wife's poshmark: https://posh.mk/E4zpllwsGcb Free shipping on first order if you mention DIYTechnician!

DIY How to Clean out a Pellet Stove and Re-Load Pellets [Harman Pellet S...

Harman Pellet Stove Cleaning Process and Pellet Loading instructions [Harman Pellet Stove]. I really love this pellet stove. I've always burned wood for heat in my woodstove but have grown to love this pellet stove. There are some special cleaning tasks that need to be performed to keep it healthy and functioning properly. Along with cleaning out the ash with a shop vac I like to keep the front glass clean as well for maximum visibility of the pellet stove's flame. For cleaning the glass we found that a magic eraser worked really well for getting the bulk of the tightly adherent soot that likes to stick around the glass. We also will use a vinegar solution for a finer shine and cleaning as well. I'm finding that this pellet stove is not as much mess as dealing with wood kindling and logs. The pellets come in plastic bags for easy storage. We keep a decorative trashcan next to the pellet stove to store pellets and use an old paint bucket with a handle on it for a pellet scooper to dump them into the top of the stove. The stove has a blower built into it that helps circulate the heat nicely. Link to my wife's poshmark: https://posh.mk/E4zpllwsGcb Free shipping on first order if you mention DIYTechnician! #harman #pellet #fireplace #pelletstove #heat

NARWAL Revolution Electronic Darboard | Wal-Mart | Unboxing, Set Up, Usa...

Takes three AA batteries (included). Comes with a set of darts for two person play. The set up and mounting of this was really easy and it came with a paper template as well which made it really easy to hang. In my "NARWAL Revolution Electronic Darboard | Wal-Mart | Unboxing, Set Up, Usage and Review", I show you from start to finish how to set this up and play a game as well. Viper 777 Electronic Dartboard Sport Size Over 40 Games Auto-Scoring LCD Cricket Display Impact-Tough Target for Lasting Durability and Ultra-Thin Spider for Fewer Bounce Outs with Soft Tip Darts: https://amzn.to/3o5Vuz2 https://www.patreon.com/DIYTechnician

Schlage Doorknob Door Handle and Deadbolt installation on Metal Gate Hou...

A unique feature of this doorknob compared to many Kwikwet (and other) doorknobs I've installed is that it can remain unlocked from the inside while being locked on the outside. In my opinion this has it's advantages and disadvantages. The advantage is that it is easy to install and use. You can turn it from the inside but the outside portion is locked. This leads me to the disadvantage....you can easily lock yourself out if you are used to doorknobs that can't be turned from the inside due to being locked...If you are going out without your doorknob keys, it's really easy to lock yourself out! =). I installed this set up in conjunction with a Gatehouse Brand Gibralter Model Metal Security Door. See the step by step installation tutorial in my "Schlage Doorknob Door Handle and Deadbolt installation on Metal Gate House Security Door" video. Here's an amazon link to one ( I get a tiny small cut of profit if you order one): Schlage FB50NVGEO716 Georgian Entry Deadbolt Lock, Bronze: https://amzn.to/39W7EVZ DEWALT 20V MAX Cordless Drill / Driver Kit, Compact, 1/2-Inch (DCD771C2): https://amzn.to/39OSFx8 https://the-avant-garden.blogspot.com https://www.patreon.com/DIYTechnician Link to my wife's poshmark: https://posh.mk/E4zpllwsGcb Free shipping on first order if you mention DIYTechnician!

DIY How to Install a GateHouse Gibralter Model Metal Security Exterior D...

The installation performed during my "DIY How to Install a GateHouse Gibralter Model Metal Security Exterior Door | 36" X 80" # 386847" video was performed on the front exterior door of a house. I've installed many of these over the years and all of them have stood the test of time. This was a worry of mine after putting installing the first one in fear that they wouldn't hold up to years of slamming as well as keeping bugs out. If installed correctly they will last decades. Most regular door knobs and deadbolts can be installed on these. Be sure to take into consideration any interferences that the door knobs you are choosing to use don't interfere with the existing door knobs. One nice option, if you need to use it, is that these doors can be installed in either direction. Just flip it over so it opens the other way. These can be purchased at Lowe's for around $150. I used a cordless drill to sink in the lag bolts that come with the door. You can use a regular electric drill to drive the lag bolts however, you may run the risk of snapping them off if you over tighten. I like to set my cordless drill so it will "give" so as not to over tighten and snap off the head. Along with lag bolts, it also comes with a special bit to drive them in. After taking measurements and determining what door to purchase: Step 1: Unbox and pull out lag bolts and insertion drill bit Step 2: Shim under door to raise to desired height and level Step 3. Install hinge side of door Step 4. Install opposite side of hinged door square stock and the top Step 5. Install door knob and deadbolt If you want to go with another brand, here is a more expensive heavier duty metal security door from amazon: Prime-Line Products 3853BK3068-WF Flagstaff Steel Security Door, 36" x 80", Black: https://amzn.to/35S2sBq DEWALT 20V MAX Cordless Drill / Driver Kit, Compact, 1/2-Inch (DCD771C2): https://amzn.to/39OSFx8 https://www.diy-technician.com https://the-avant-garden.blogspot.com https://www.patreon.com/DIYTechnician

Hoyt Easton Compound Bow Dry Fire Disastrous Results | Don't Do THIS!!!

Explanation of what a dry fire and and what happens in my "Hoyt Easton Compound Bow Dry Fire Disastrous Results | Don't Do THIS!!!" video. The limbs and string are toast and not suitable for another draw at all. Bow should be immediately repaired. Extreme physical harm has come from dry firing a bow from just the first time but the odds of getting seriously injured go way up if you even fire a bow that has been dry fired before. If dry fitting occurs, do not attempt to pull the string back again and get the bow immediately inspected by a professional at a bow/outdoor shop. Even if you don't see the damage, it could be minimal enough not to be detected with the naked eye but could still cause injury after being dry fired. Here's an amazon link to a new bow: PSE ARCHERY Evolve 28 Compound Bow Kit-Compact-Hunting - 70 lb. Draw Weight - Black: https://amzn.to/2XPmNTI

DIY How to Install a Whirlpool Refrigerator Ice Maker and Water Dispense...

Start to finish instructions here in my "DIY How to Install a Whirlpool Refrigerator Ice Maker and Water Dispenser | Step by Step Tutorial". This is a very easy installation if you are able to hook into you existing dishwasher water supply line/valve. All you need is a three way valve that has a shut off with a 3/8" connection for the dishwasher and then a 1/4" connection for your ice maker. This operation is best done using two people to determine drill locations and running your ice maker line. Step 1. Measure approximate distance from water supply valve to refrigerator (this determines the length of steel braided water line that you need to purchase. ( I used a 20' length...always buy a little longer than what you may think you'll need). Step 2: Get (buy)three way coupling from plumbing supply store or Lowe's/Home Depot (they are fairly cheap). Step 3. Buy Ice Maker Steel braided 1/4" water line from plumbing supply store Step 4. Turn off Water at main supply valve to house Step 6. Drain existing water from inlet main water line after turning off main valve to house by cracking any sink valve in the house. (Make sure you are not running anything such as a washer or dishwasher during this time). Step 7. Disconnect dishwasher from valve (usually a 3/8") with an open ended wrench or crescent (open ended adjustable) wrench. Have dry towels at the ready as there will be residual water. Step 8. Install new three way coupling Step 9. Hook up dishwasher line to 3/8" connection on three way coupling Step 10. Determine drill sites in floor behind refrigerator and under kitchen sink Step 11. Drill holes using slightly larger drill bit than the size of hose connection nut Step 12. Connect ice maker line to coupling under kitchen sink Step 13. Run braided steel line under house up through hole behind refrigerator Step 14. Connect other end of hose to refrigerator connection Step 15. Once tight, turn main water to house back on (best to have partner monitor connections for leaks). Step 16. Silicone around holes that were drilled to keep rodents out etc. Step 17. Pour water and wait a couple hours for ice to form Step 18. Enjoy your ice maker https://www.diy-technician.com Shark Industrial 25 FT Stainless Steel Braided Ice Maker Hose with 1/4" Comp by 1/4" Comp Connection: https://amzn.to/2L8YOfv #ice #icemaker #whirlpool #Water #dispenser #howto #diY #Lowes #HomeDepot # valve #instructions #kitchen #clean #waterline #lesson #instructions

How to set up your HP Envy Pro 6458 Printer | How to Print Scan and Copy...

How to set up your HP Envy Pro 6458 Printer | How to Print Scan and Copy Tutorial. This Hewlett Packard Printer was available at Cosco in the United States or here on Amazon: HP Envy Pro 6458 All-in-One Color Inkjet Printer, Copy, Scan, Mobile fax, Instant Ink Ready, 5SE48A (Renewed): https://amzn.to/3nmo3Il The set up on this was very easy as there is no installation disc to mess around with. The software gets downloaded from HP's website which is https://www.123.hp.com Set up Instructions: Step 1: Unbox and plug in printer power cord and power up printer Step 2: Install Black Ink Cartridge Step 3: Install Color Ink Cartridge Step 4: Download printer software from 123.hp.com and follow installation instructions Step 5: Ready to go (Now Subscribe to my Youtube Channel please) Printing Instructions: Step 1: Fill paper in bottom-most paper tray (Not the top feeder; this is for copying) Step 2: Click on "File" then "Print" Copying Instructions: Step 1: Insert the paper/s you want to copy in top feeder tray (face up) Step 2: On the Envy Pro Printer, press the paper icon Step 3: Wait to copy/copies to dispense from printer Scanning Instructions: Step 1: Lift up top portion of printer to expose scanning surface Step 2: Place document you wish to scan face down on glass Step 3: Close top lid down on document Step 4: Press the paper icon on Envy Pro Printer (same icon as you press for copying"

DIY Pfister Brand Karci Bathroom Sink Faucet Installation | Matte Black ...

DIY Pfister Brand Karci Bathroom Sink Faucet Installation | Matte Black Finish | Part # 1158237 It's always a good idea to be sure to turn off the main water supply just in case you have any mishaps with the plumbing valves even though you will be turning them off at the hot and cold under the sink. I got lucky on this one but have had them leak in the past or even crack in some cases due to them being old and part of various remodels. Although this kit comes with an installation tool I still needed to use some extra simple tools as some of the connections were tight up close to the wall so the installation tool wasn't the most effective in tightening all of the under sink connections. Just a small open end adjustable wrench (crescent wrench) will work. Pfister Karci Matte Black 2-Handle Widespread WaterSense Bathroom Sink Faucet with Drain: https://amzn.to/38CYNbp

DIY How to Install Vinyl Laminate Flooring | Lifeproof Brand WaterProof ...

If you've never installed this flooring before than my "DIY How to Install Vinyl Laminate Flooring | Lifeproof Brand WaterProof Rigid Core Beginner Tutorial" is for you. This demonstration was performed on a bathroom floor remodel once the toilet, vanity and flooring were removed. See my other videos on preparing your surface for vinyl flooring install: DIY How to Pull a Bathroom Toilet | Easy Step by Step Thrown Removal Tutorial: https://youtu.be/RFT0iAz-Kss DIY How to Demolish Old Bathroom Vanity | Wash Station Countertop Removal Demonstration: https://youtu.be/F1SGIQd96XY DIY How to Remove Old Bathroom Vanity Sink | Quick and Easy Technique for Wash Basin Extraction: https://youtu.be/Xn-7C0q7s8c DIY How to Pull Up and Remove Old Bathroom Linoleum Glue Down Flooring | Step By Step Demonstration: https://youtu.be/RMyyx1Mq7gU LifeProof I106515L Luxury Vinyl Plank Flooring 8.7" x 47.6" - Restored Wood: https://amzn.to/37RqpKy ZEXHOM Professional Laminate Wood Flooring Installation Kit with 40 Spacers, Upgraded Tapping Block, Widen Pull Bar and Heavy Duty Mallet: https://amzn.to/38G81n2 https://www.diy-technician.com

DIY How to Remove Old Bathroom Vanity Sink | Quick and Easy Technique fo...

DIY Tutorial shown here in my "DIY How to Remove Old Bathroom Vanity Sink | Quick and Easy Technique for Wash Basin Extraction Method" video. Since the wash basin was glued down to the vanity I took care to make sure I didn't fracture the old sink coming out in case the need arises to re-use the same sink fixture. I just used a wooden shim and a rubber mallet to slowly pry apart the sink from the bathroom vanity surface. Nelson Wood Shims 8" 12 Pack - Kiln Dried Wood - Set of 2 (Total 24 Shims): https://amzn.to/2WNEBOs TEKTON 30603 Fiberglass Handle Rubber Mallet, 16-Ounce - Black: https://amzn.to/3hhpMx4 https://www.diy-technician.com

DIY How to Demolish Old Bathroom Vanity | Wash Station Countertop Remova...

Just used a hammer, pryer and cordless drill (driver) in my "DIY How to Demolish Old Bathroom Vanity | Wash Station Countertop Removal Demonstration" video to remove old bathroom vanity for bathroom remodel. CRAFTSMAN Hammer, Fiberglass, 16 oz. (CMHT51398): https://amzn.to/3aL9rPU TEKTON 3318 15-Inch Utility Pry Bar: https://amzn.to/3rt5Vj9 BLACK+DECKER 20V MAX Cordless Drill / Driver with 30-Piece Accessories (LD120VA): https://amzn.to/3aDXlbk https://www.diy-technician.com

DIY How to Pull Up and Remove Old Bathroom Linoleum Glue Down Flooring |...

DIY How to Pull Up and Remove Old Bathroom Linoleum Glue Down Flooring | Step By Step Demonstration Warner 5" Heavy Duty Floor Scraper, 48" Steel Handle, 591: https://amzn.to/3mTVG3I Warner 4" ProGrip Stiff Broad Knife, 90119: https://amzn.to/3aJV5PG https://www.diy-technician.com

DIY How to Pull a Bathroom Toilet | Easy Step by Step Thrown Removal Tut...

Before removing your toilet you may want to ensure you have a wax ring on hand for a speedy re-installation should it become rapidly necessary. In my "DIY How to Pull a Bathroom Toilet | Easy Step by Step Thrown Removal Tutorial" video I take you through the simple steps of removing a toilet. 1. Shut off water at valve 2. Flush Toilet to remove excess water 3. Remove water connection valve from toilet and drain into bucket 4. Optional: Remove extra water from toilet bowl with water extraction tool such as old turkey baster or large syringe). 5. Remove hold down bolt/nut caps 6. Remove hold down nut on either side of the toilet 7. Using your leg muscles (not your back if possible), pull straight up on toilet 8. Set toilet on towel to stage it for reinstallation 2 Pack Toilet Wax Ring, Thick Toilet Bowl Wax Ring Gasket for Toilet Bowl- Gas, Odor and Watertight Seal: https://amzn.to/38DTxUK https://www.diy-technician.com

DIY How to Frame In and Trim Out Narrow Entry Way Interior Household Doo...

DIY How to Frame In and Trim Out Narrow Entry Way Interior Household Door Windows | Tutorial Demo DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779): https://amzn.to/2Wi3Msi CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1): https://amzn.to/3mox6HT DEWALT 20V MAX XR Oscillating Tool Kit, 3-Speed (DCS356C1): https://amzn.to/37hlm5K

DIY How to Assemble a Bedframe (Full, Queen, or King) | Step by Step Tut...

DIY How to Assemble a Bedframe (Full, Queen, or King) | Step by Step Tutorial Amazon Basics 9-Leg Support Metal Bed Frame - Strong Support for Box Spring and Mattress Set - Tool-Free Easy Assembly - Full Size Bed: https://amzn.to/34fEIqd

How to Start a STIHL Chainsaw | Simple Instructions for New STIHL Chains...

It's best practice and recommended by manufacturer that you start the chainsaw with it on the ground vs. how it's shown in the demo video. This example was done on an MS-250 model chainsaw. Be sure it's got bar oil and properly mixed gas. Husqvarna 20 Inch 455 Rancher Gas Chainsaw: https://amzn.to/2K8gNls

DIY Butcher Block Countertop RESCUE!! Countertop Job Finish and Repair

DIY Butcher Block Countertop RESCUE!! Countertop Job Finish and Repair. The contractor that initially did this made some bad cuts and never returned! Rescue and repair needed and performed to finish out butcher block countertops. BenchPro 1" Thick Solid Butcher Block Maple Top - Multiple Sizes: https://amzn.to/2IV9IV2

DIY How to Replace and Install New Front Door Sweep | Household Exterior...

Stop those drafts with my a DIY How to Replace and Install New Front Door Sweep | Household Exterior Door Bottom Seal Upgrade. There was a detectable draft coming from the existing bottom door seal so it needed to be replaced. This can be done fairly cheap if you do it yourself. M-D Building Products 19105 Storm Door BTM WHT 36", 36 x 1.75 x 1.5, White: https://amzn.to/3mkOVaM

DIY Kwikset Interior Door Knob installation | Door Edge Not Chiseled | N...

In my "DIY Kwikset Interior Door Knob installation | Door Edge Not Chiseled" Video I demonstration how to install a Kwikset Doorknob in a door that has not been chiseled or routered to facilitate a latch plate. Simply remove the plates from the latch mechanism with a flat head screwdriver and install it using the provided collar insert instead. Kwikset 97402-895 Pismo Keyed Entry Door Knob Featuring SmartKey Security, Round, Iron Black: https://amzn.to/2VbRkcN

DIY How To Clean Glass on Pellet Stove or Woodstove | Make Flame Damaged...

In my "DIY How To Clean Glass on Pellet Stove or Woodstove | Make Flame Damaged Glass Look Like New" Video we show you the secret on how to remove the creosote or "flame damage". It's really simple and the answer is to simply use a magic eraser. You can get them in many places. We got these from Wal-Mart. Using one of these vs. other methods will save you hours of scrubbing. Be sure the glass is completely cooled off before you start using this method. This example was demonstrated on a Harman Brand Pellet Stove. Mr. Clean Magic Eraser Extra Durable, Cleaning Pads with Durafoam, 10 Count: https://amzn.to/3lbEgPt Description from the link above is that these Mr. Clean Magic Eraser extra durable scrubbers are 4x stronger with DURAFOAM cleaning performance vs. The leading all-purpose bleach Spray This cleaning scrubber is tough on dirt, all around the house! Surface cleaner, wall cleaner, bathtub cleaner, bathroom cleaner, oven door cleaner, erases marks on light switches, doors & much more! The Mr. Clean Magic Eraser provides a powerful clean with water alone. No harsh chemicals added. Magic Erasers are also available in extra durable, kitchen, and original forms

Taura Plum Grove Hike in Kanagawa Prefecture in Yokosuka, Japan | Nice P...

How to Operate a Japanese Hitachi Air Conditioner and Heater Unit | Kanj...

How to Operate a Japanese Hitachi Brand Washer | Kanji Translation and T...

How to Operate a Japanese Bidet Toilet Seat | Kanji Translation and Tuto...

Japanese Can Opener Operation | What one is and what it looks like

Takeishi Park along Japanese Coast | Beautifully Scenic and Peaceful

Mt. Oyama Day Hike | Panoramic Views | Beautiful Temples | Kanagawa, Jap...

Mt. Oyama Day Hike | Panoramic Views | Beautiful Temples | Kanagawa, Japan | Mt. Fuji Views. This hike is very steep. The trick to beating the crowds here is to show up as early as possible. Awesome sacred temples here too. The reward at the top is well worth the climb. There is a rail car that will take you part way up and down the mountain if you wish. There were a couple of hard core in shape runners that passed us and ran to the top and down. There is a bathroom at the top and a place to sit and enjoy a meal if you wish. Part way up there is also a place to buy some food and water etc.

Wednesday Evening 1 Hour Rainy Run Past Denny's Followed By Satiating Ja...

Wednesday Evening 1 Hour Rainy Run Past Denny's Followed By Satiating Japanese 7-11 OMAD. After fasting all day and on run #2 the smells coming from Denny's REALLY smelled good.
Yokosuka, Japan offers so many cool running routes with no shortage of hills, tunnels and different smells.

Tuesday Morning Yoko Run Plus OMAD | Caesar salad, Smoked Salmon, Grapes...

DIY Pallet Wood Drill Bit Holder for Organizing your Stray Drill Bits | ...

Tired of looking all over for the right size drill bit? Got a drawer full of drill bits just asking to be organized? I know I did. Check out my "DIY Pallet Wood Drill Bit Holder for Organizing your Stray Drill Bits | Free to Make" Video. All you do is just grab a scrap piece of wood or pallet wood and drill into it with the actual drill bit you are wanting to store in there. Then you flip it around and slid the drill bit in there. If you want to get fancy you could even write the size of the drill bit next to in or in front of it.

DIY Skillcraft Pen Gun

I have made these ever since I was a kid and thought I'd do a fun video on it. This is made with exclusively the part from the pen itself with no additions. Do be careful because this is one that COULD put out your eye or someone else's.

Step 1: Take the pen apart
Step 2: Remove the little white projectile from the pen depressor assembly
Step 3: Remove the spring from the ink pen
Step 4: Reinstall rear pen depressor
Step 5. Insert spring into future pen gun (rear pen assembly)
Step 6. Install projectile onto spring that's been inserted into rear pen assembly
Step 7: Take ink pen (ramrod) and push projectile into chamber

You are now locked and loaded. Wear eye protection. Don't aim this at anyone. Don't shoot it at anyone.

Friday Night Japanese OMAD | Sushi Caterpillar Roll | Spicy California R...

Saturday Sunshiny Run | Mid-Morning to Noon Run In Beautiful Yokosuka, J...

Weds OMAD- I Over Did It: I was Hungry as a Wolf | Octopus Salad, Spring...

Thursday Run All Over Yokosuka, Japan and Off the Beaten Path | Stairs a...

Day 1 on $14 Reeboks | ENERGYLUX 2.0 | Trial & Review | Running in Yokos...

DIY Wine Cork and Rubber Band Cable Tie Strap | FREE and Easy Set Up | M...

Japanese Bike Tube Valve & How to Pump Up Your Tire | aka. English Valve...

DIY Japanese Yen and Rubber Band Cheap Chord Strap Trick | Works with a ...

DIY Redneck Cable Ties | FREE and Simple Set Up Using a Pop Can Tab and ...

DIY Redneck Cable Ties | FREE and Simple Set Up Using a Pop Can Tab and ...

DIY Three Quick and Easy Ways to Repair You Covid Mask | Staple | Half H...

Hike Japan's Amazing Mt. Takatori-Yama & the Temple of Jimmu-Ji | Great ...

Japan's Amazing Mt. Takatori-Yama and the Temple of Jimmu-Ji | Great Day Hike in Kanagawa Prefecture. This is just outside Yokosuka's city limits. It's about a 35 minute bike ride from blue street in Yokosuka.

This awesome spot is great if you are into rock climbing. There are tons of holds in the rocks for climbing these amazing completely vertical rock faces. The view from the top of each of them is well worth the work put in to get up there. Even if you are not a rock climber just hiking this whole area is majestical. I will he back. If you are going to do it in the summer, bring lots of water. The Jimmu-Ji temple is really cool. You can get a close up glimpse of real Japanese craftsmanship by visiting here.

I rode my bike here and hiked for a few hours and was in awe at everything. It's a nice peaceful nature break from the busyness down in the city.

DIY Schwinn Bicycle Bell Installation For Dummies

Are you without a bellon your bike? Is your old bell dead? Well go pick up or order from amazon one of these Schwinn Bike Bells and follow my "DIY Schwinn Bicycle Bell Installation For Dummies" video for installing it. Here is the link:



Schwinn Classic Bicycle Bell, Black, One Size: https://amzn.to/2ZduAMe



This is a classic style bicycle bell that alerts others on the road or trail for added safety. It fits most bicycle handlebars with super easy installation & removal. There are no tools required either. This versatile classic bell is specially designed to fit either side of the handlebars.

Is My Diamond Real? | DIY Test to see if Diamond is Real or FAKE! | Hold...

Liberty Cove Apartments In Yokosuka Japan

Close the the train station, great view, shopping nearby, mall just across the street with grocery stores and food shops, quiet and spacious. Friendly staff.

Yokosuka T-Shirt - STRAIGHT OUTTA YOKOSUKA Shirt: https://amzn.to/3aYY0Cp

ZERO WATER Brand Water Purifying Pitcher | Review and Assembly Instructions

Zero Water Brand Water Purifying Pitcher | Review and Assembly Instructions



Amazon link below to pitcher.

ZeroWater 10 Cup Round Water Filter Pitcher, clear: https://amzn.to/3aS7nUg



Link to the replacement filters: https://amzn.to/2EnZfyT



Also visit my website: https://www.diy-technician.com



This is a ten cup watering pitcher that filters water where you'll always have cleaner, pure tasting water on hand with this space saving filter pitcher in your fridge. The included, free water quality meter lets you test your water, so you never have to wonder about its quality. Once that meter gets to 006 it's time to change out the filter.



The company claims is a 5 stage water filtration system (cannister) and supposedly unlike many water filters & pitchers, Zero Water filters use 5 stages of filtration, to bring you cleaner, better tasting water. Instead of carbon filtering only. Not sure exactly what this means but they claim that their filters use Ion exchange technology to reduce contaminants.



The company's verbiage claims that the Zero Water brand filters filter water in 5 stages, are NSF certified to reduce lead and other heavy metals. Zero Water removes 99. 6% of total dissolved solids, 2x more than the leading brand (tested by independent lab). Not sure how much of this I believe but I guess I have to take their word for it.



This company boasts that their filters help in getting the lead out of your water. ZeroWater filters are the only pour-through filters NSF Certified to remove chromium & lead. Their pitchers, tumblers, & dispensers remove virtually all solids for the purest tasting water.



Zero water claims that you can get more out of your water by removing more impurities from your water with Zero Water unique, 5 stage filter system. with a variety of options (if you buy different models), you can have cleaner water anywhere, from pitchers, bottle filtration systems, or portable on-the-go cup filters.

Winchester 12GA Pump Action Shotgun Full Disassembly Tutorial | Cleaning...

DIY How to Make a Lethal Chopstick Pen Gun Weapon | Wicked Projectile Pe...

After whittling down the chopstick a little for a nice tight, yet smooth fit in relation to the bore of a pen all you need is a chopstick, rubber band and the body of a pen. For any kids or unknowing adults, this is for target practice only. Much like an actual firearm, do not point this at or towards anyone and wear eye protection anytime you decide to operate any weapon like this. This is meant to be a fun target practice activity.

Amazon link. Disposable Chopsticks, pack of 40 pair: https://amzn.to/31xeWeJ

Visit my website: www.diy-technician.com

Blog: https://diytechnician.tech.blog

How to Pimp Your Subway Sandwich | DIY Upgrades | Protein and Omega 3 Bo...

Current nearest subway location only serves sandwiches with limited veggies, mayo and mustard. If you want your sandwich to rock you just gotta DIY.



Amazon link. SubSafe Sub Sandwich Container – This Reusable Sandwich Container Keeps Your Sub Safe, Not Soggy – Ideal Boating Accessories and Cooler Accessories – As Seen On Shark Tank, Makes a Great Gift: https://amzn.to/2DRALgM

DIY How To Do Laundry During Quarantine | No Washer No Dryer

If you find yourself under lockdown circumstances for extended periods of time you will likely need to do laundry. To do laundry you will need to make the most of what you have. If you are lucky you will have a means to obtain hot water and hopefully some soap. If not, variations of these same principles in my "DIY How To Do Laundry During Quarantine | No Washer No Dryer" video can be used.

Here's a link to laundry soap from Amazon: https://amzn.to/3aaO5cr

DIY Wood Floor Repair Project | Cheap Quick Fix | Wood Filler Putty and ...

The wood just inside this sliding glass window has taken a beating from sunlight and moisture. It really needs to be replaced. So much so that it is starting to show signs of rot and is giving way at some of the edges. Rather than try to refinish it or replace it right now, this wood putty fix was just what was needed for a cheap and quick repair job. If I was the owner I would not have it get as far damaged as it did and would have refinished it. It's possible it's still salvageable but definitely needs to be resealed to prevent further damage. For this band-aid type of quick fix I just used some wood filler putty, both light and dark and tried to come close on a color match but was unsuccessful so I used a furniture touch up marker to bend it in so the repair didn't stick out as much.

Katzco Furniture Repair Kit Wood Markers - Set of 13 - Markers and Wax Sticks with Sharpener - for Stains, Scratches, Floors, Tables, Desks, Carpenters, Bedposts, Touch-Ups, Cover-Ups, Molding Repair: https://amzn.to/2PHE2Ch
Visit www.diy-technician.com

Whats Inside? Fujitsu Brand Lifebook Laptop | Complete Teardown Take-Apa...

Join me on this take-apart. At first, I attempted to take this apart in a surgical fashion. I was successful for the most part but ran into a few roadblocks and busted some plastics in the process but not for a lack of trying. If I had to take another one of these apart, I'd watch this video and see that there are some strategically placed hidden Phillips head screws. I learned a lot from this teardown. There were some salvageable parts discovered as I tore this down. I was really surprised how thin a laptop computer "monitor" or screen is. Modern technology is amazing...AND this sucker is considered outdated!! wow. Either way, I'm sure it's like most modern products (from China), not built to last. I have yet to own a computer as good as an Apple. Anyway this was fun to take apart and check out the guts even if I have no idea what the hell they do.

DIY How to Unclog a Bathroom Sink | Super Easy Method

In this video I got through the steps on unclogging a bathroom sink. Many times the problem can be a super easy fix that will require you to get your hands dirty. This will save you a couple hundred bucks though. In the case presented in this video I was able to unclog this bathroom sink just using a pair of cheap hemostats. I'll post the link to some below but I must say, they are well worth what you may pay for them as they have many uses and I've used them to unclog numerous sinks over the years along with many other uses on various jobs.



Link to hemostats on amazon: https://amzn.to/2YnpNGy

New APEX PRO Steelseries World's Fastest Gaming Keyboard! Unboxing, Xbox...

New APEX PRO Steelseries World's Fastest Gaming Keyboard! Unboxing, Xbox Connection & Fortnite demo. Here's the official description. SteelSeries Apex Pro Mechanical Gaming Keyboard – Adjustable Actuation Switches – World’s Fastest Mechanical Keyboard – OLED Smart Display – RGB Backlit



Here's the link to order one: https://amzn.to/2BkddjL



Omni point adjustable switches allow for customization of actuation distance.

OLED smart display offers an integrated command center for adjusting settings and tracking on the fly info straight from your game.

According to description this is aircraft grade aluminum alloy built for a lifetime of durability and stability. I don't necessarily buy the "lifetime" statement but whatever. It's a good marketing word for the company

The description also claims RGB illumination unmatched customization with 16.8 million colors per key which I have no idea what this means but it sure does sound like it's doing something good.

I do agree that the premium magnetic wrist rest provides full palm support and comfortable, ergonomic feel without a doubt.

DIY Self Closing Door Hinge Installation and Operation Instructional Tut...

No need to try to shut the door behind you while you have your arms full anymore. Watch this DIY Self Closing Door Hinge Installation and Operation Instructional Tutorial and put one in yourself. It's easy. I'll post a link to some below. Simply remove the middle existing hinge on the door (leaving the upper and lower one in place) and install the self closing door hinge in it's place. It's easiest if you use a cordless drill for the hinge fasteners but not mandatory. You could do this with a regular handheld manual screwdriver. You will need the correct size Allen (hex head) wrench for the internal set screw to set the tension on the hinge. Some of the hinges will come with the correct size Allen wrench to use. You tighten the Allen screw inside the hinge to set the tension of the hinge on desired self-closing strength. You can always adjust it later if you find you don't like your settings.



Here is a set of them on amazon: https://amzn.to/2TTARK5

How to Unclog a Kitchen Sink Drain in Singapore | No P-trap Under Sink

The Singapore under sink plumbing set up is different than what I've seen in the states for the most part. This set up is pretty nice in many ways but also seems to clog up more frequently than most of the standard US p-traps I'm used to dealing with. This is really nice in the sense that when it does clog up you just put your water catch basin under the sink and unscrew the receptacle, dump it out, and screw it back on. Really a great set up if you ask me. The problem I saw was that it leaked no matter how tight I tightened it by hand once it was full of food waste debris.



Here's some good plumbing/unclogging tools to have:



Amazon link to sink snake: https://amzn.to/35qyiDR



Amazon High Pressure Nozzle with Shut off: https://amzn.to/3d6yBX5



Amazon Plunger: https://amzn.to/3d8BaYN



Amazon Unclogger/Grabber: https://amzn.to/2ybx3wm



Amazon Hemostats: https://amzn.to/2SrDj9T

DIY How to Create a Swedish Fire Torch | Outdoor Long Burning Log Round

In my DIY How to Create a Swedish Fire Torch | Outdoor Long Burning Log Round" video I show you how to quickly and easily make a fire log project. I'm reposting this video after having found it in my archives. I had deleted it from an earlier youtube endeavor a few years back. The idea of a Swedish torch itself was not mine, however, after watching some videos on it back in the day I figured I'd make my own version using my trusty Stihl chainsaw. These are a lot of fun to make and burn for a solid couple of hours + depending on what kind of wood you are burning. This was just a round of fir but I could only imagine how much burning time you would get out of a round of a hardwood like oak or even madrone (I call them madrona).  You can use a chainsaw but you could also use a bucksaw or handsaw to make one. You could do this camping or if you are able to, in your back yard.



Amazon Link to Husqvarna Chainsaw: https://amzn.to/2Wv4H87



Woodcutting Safety Pants: https://amzn.to/3dfJTs1

DIY Welding Project: How to Weld an Ornamental Iron Folding Easel for Pa...

I made this video "DIY Welding Project: How to Weld an Ornamental Iron Folding Easel for Painting or Picture Display" for fun for my daughter's painting display. You can really make some cool decorative easels using different pieces of decorative metal. These are fun to make. I've made and sold many of them in the past. This one was just a basic model and wanted to keep it simple. Easy welding project and they last forever. Easy to fold up and store when not in use as well.

Amazon link to heavy duty easel: https://amzn.to/2xFXTfC

Amazon Aluminum Easel: https://amzn.to/2WsqWeU