DIY HomeBrew Cooper's Irish Stout Recipe Making and Taste Testing [Coope...

DIY HomeBrew Cooper's Irish Stout Recipe Making and Taste Testing [Cooper's Irish Stout Home-brew]. This one is an estimated 5%. Great tasting. I like it better than guiness. I’ve had a couple stouts that are just outstanding. This one really has a nice sweeter taste to it. I was really surprised on how this one turned out. It has some wonderful notes of coffee and just a hint of licorice coupled with it’s nice and roasted smokey profile. It is a fully bodied beer with a smooth and creamy soft mouthfeel with moderate carbonation (but more than expected). As you can see from the video the sun has a hard time penetrating through the glass of the fine black stout thanks to the roasted barley. I can’t take full credit for making it as I purchased all of the ingredient. It was just a matter of putting them together correctly and waiting. It has a slight aroma of graininess and smoke. This batch turned out without any harsh characteristics or one characteristic overpowering the other, rather, just a nice enjoyable pleasant mix of all. The froth and creaminess of this stout seems to balance it all out and bring it all together. This beer is Vegan, however, I’m not sure if it’s necessarily Gluten free. No animals were killed during the brewing of this beer. The question gets asked sometimes, “Is Stout Good For you?”. It’s allegedly full of antioxidants and flavonoids which are the same thing that give fruits and veggies their dark color. Getting these anti-oxidants into your system is great for your heart and what a better way to do it than a tall glass of this nice home brewed delicious stout. Antioxidants are molecules that neutralise free radicals – unstable molecules that can harm your cells. We usually find them in foods such as raspberries, kale and artichokes – amidst many other fruits, vegetables and nuts. The health benefits associated with a diet packed with plants are at least partially due to the variety of antioxidants they provide your body! It’s been said that this will slow down the deposits of cholesterol on artery walls reducing risk of heart attacks. Stouts also generally have less calories per serving than other lighter beers! Here's a paid link to the kit: Irish Stout Homebrew Beer Ingredient Kit: https://amzn.to/3zQQsNh

DIY Home Brew | Northern Brewer Bavarian Hefeweizen | Full Brewing, Bott...

Ordered my Northern Brewer Bavarian Hefeweizen home brew kit from amazon. I'll post the link below This turned out really nice and was super easy to make. The kit comes with a nice set of directions. I used my Cooper's DIY Beer fermenter once the boiling and cooling processes were done.



The steps are super simple simple:



1. In your brewpot, bring 2.5 gallons filtered water to a boil

2. Add half of the wheat malt syrup (approx. half of 6lb. container)

3. Remove from heat and stir it in

4. You now have wort. Bring it to a boil again

5. Add the 1oz of German Tettnang hops and boil for 60 minutes

6. Add the remainder of the 3lbs of wheat malt syrup and add the 1lb of dry malt extract

7. Cool the wort.

8. Once cool, (siphon) add wort to fermenter leaving sludge at bottom

9. Fill remainder of fermenter (to 5 gallon mark) with water

10. Pitch yeast and add to wort once temp is 78F or lower (not warm to touch)

11. Let sit in fermenter for 2 weeks then bottle using priming sugar or carbonation drops

12. Let sit in bottle for 3-4 weeks.

13. Refrigerate for 1 day and then enjoy.



Link to Hefeweizen: https://amzn.to/2Vdp8HD



Blog: https://the-avant-garden.blogspot.com

DIY Home Brew | English Brown Ale | Craft Beer Recipe Kit | Brewing to T...

Follow along step by step during the video.  DIY Home Brew | English Brown Ale | Craft Beer Recipe Kit | Brewing to Taste Test. This turned out really good and got better after 3 to 4 weeks.
The first step was pouring about 2.5 to 3 gallons of filtered water into my brewpot. This brew kit came with grains to steep and make the wort as well as liquid malt extract and dried malt extract. The grains must be steeped in the brewpot. Once you steep them, much like tea, don't squeeze the grain bag after steeping, rather just let it drain. This is what make the wonderful wort. Now bring the wort to a rolling boil and add the liquid malt extract, the aromatic hops and the dried malt extract. Boil it for around and hour then cool it down as quickly in an ice bath or use a wort chiller. Once cooled down I then added the wort to my fermenter and added filtered water to the 23L mark. I then added the yeast. Once the yeast is added the brewing is complete. Now I let it ferment for 2 weeks. Once the 2 weeks was up I bottled it. I mixed and added priming sugar to the fermented brew right before bottling. After bottling I let it sit in the bottle for minimum of two weeks. Before partaking, I placed in the refrigerator to chill.

Here's the link to it: https://amzn.to/2TR2nag

DIY Home Brew: Northern Brewer | Dead Ringer India Pale Ale Kit

I ordered this awesome beer kit from amazon. In this DIY Home Brew: Northern Brewer | Dead Ringer India Pale Ale Kit video, I take you step by step through unboxing, brewing and taste testing. This was ready to drink in just over a month. The first thing I did was heat approx 2.5 gallons of filtered water to 155F or approx 68F. Then take the provided grains, pour them into the grain bag, tie off the grain bag and place it into the water once it reaches temp. Maintain that temperature, no higher and no lower (plus or minus a couple degrees), and let it steep for 20 to 30 minutes. Once 20 to 30 minutes has elapsed, pull out the grain bag and let drain over the newly created wort. Don't squeeze it. Then it's time to bring the wort to a slow rolling boil. Total boiling time will be 60 minutes. Once boiling add the liquid malt extract. and stir in well. While it's boiling I added cool filtered water to the fermenter. I then added hops at 10 minutes time intervals and stirred them in. Once 60 minutes in complete I transferred the wort immediately to an ice bath. Once completely cooled I transferred (siphoned) the wort to the fermenter and topped it off with some additional filtered water. I then added the yeast and shook it around a little. Then I installed the air lock and let the brew sit for a couple weeks in a dark area. After a couple weeks I transferred it to a separate fermenter that was actually only used as a bottle filler and then mixed and added some hops and the priming sugar solution to give the brew carbonation. I then bottled it and let it sit for a couple weeks before sampling.

DIY How to Make Green Eggs and Ham-Dr. Suess Style

Merry Xmas everyone! Dr. Suess' green eggs and ham is a fun project to make with and or for the kids. Cooking can be fun and this is something you can involve your family with having the little ones help out or even just surprise them. A little green food coloring mixed in with the deviled eggs. Tasty treat.

Along these same lines, something I always liked to do was to make "Martian Oatmeal". This keeps it a little healthier although I know that food coloring is not the best for you, you can get the kids' imagination going by adding a tiny dab of green food coloring to it. Green eggs and ham is also Keto diet friendly if that's your thing. I cooked the ham slices up in the Phillips air fryer for quick results.



Visit www.diy-technician.com



Link to Phillips Air Fryer if interested: https://amzn.to/2ZqFa15

DIY Home Brew: Brewers Best Mosaic India Pale Ale Made In Kitchen-Super ...

This was a small batch home brew that I made and it turned out fantastic. The taste test in the video was done on the last half bottle that I bottled. It was so good that I'm saving it for a special occasion. Kind of like a vintage wine that you keep on the shelf. As us home brewers know, the beer does get better the longer it sits in the bottle, to an extent. This one was a home run. It takes a solid month or so to make but it goes by quickly especially if you have other brews that you are making. You won't even notice and it'll be ready before you know it. The mosaic hops that came with this beer kit really set this off. The flavor had depth and was quite moving. I knew it was going to be good once I sampled it off the fermenter just before bottling. It only got better with age and a little more carbonation. So to get started I made a homemade fermenter out of a filtered water bottle and an airlock with bung. I had to cut out a larger hole in the top of the  water bottle in order to make this work. I pulled out all the contents of the Brewers Best Mosaic IPA beer kit. The nice thing about this is that it came with specific easy to follow directions on how to make it. You will need a food thermometer if you are going to make beers like this. They are readily available for cheap so go grab one. Temperature is important when making beer so you need to pay attention to it for favorable consistent results. This whole home brewing thing is a blast and saves you money as well if you like to partake of brews once in awhile. The process is simple, make the wort, add the fermentable, cool it down quickly, siphon into fermenter, add yeast and wait a couple weeks. After a couple weeks it's ready to bottle. When it's bottling time (I just use reusable plastic bottles) then add two carbonation drops to each one and twist the cap on tight then let sit for a minimum of two weeks. The results are outstanding as well as very rewarding.

How to make a Wine Cork Birdhouse-Tutorial Demonstration

Do you like to drink wine or know someone who does? Don't toss those great wine corks out! You can re-use them for so many things. The fact that most of the wine corks have unique designs and prints on them make them most interesting and colorful when re-purposed into different projects. I started with a couple cut-off scrap piece of cedar fence slats that were ready for the landfill and constructed my rood first just to see how it would go to get an idea for size. Then on a base piece started nailing the base row of wine corks with finishing nails. With no real plan I freestyled some wine corks on top of each other nailing each one down individually to eventually shape a nice little bird house. It was almost like a puzzle because each wine cork has a little bit of a different diameter and length to it. I then cut to 45 degree angle shapes, drilled and then nailed them to the top of the wine cork house base frame. This gives the roof support as well as something to nail it to. Then I drilled and nailed the roof to the triangular pieces. Now it's all ready for use. The use of the repurposed material was great because cedar and wine corks don't readily break down and rot quickly so this thing was built to last a long time out in the wet and cold elements. I placed it out in a field next to my house and eventually a family of birds moved in and called it home so that was rewarding. I placed some bird feed near it as well as time went on to attract them.

Visit my website: www.diy-technician.com

Wine Cork stopper https://amzn.to/31mOQKx

How to Construct a Brick Fire Pit in your Back Yard

Placed a nice metal fire ring inside the brick for easy clean up and decoration. One nice thing about living where I do is that it's legal to have little backyard bonfires. Many good times are had with get togethers around a fire. I needed to move locations of my fire pit so I decided to make a video while I made this new one. To get started I marked a counterpoint in the middle of my rough circle and started over turning the dirt with a shovel and breaker bar as it was very tough and rocky. Then I started digging out the hole in the ground deep enough to accurate the height of my fire ring that I wanted to put in the ground. I decided I wanted to inset this one into the ground for the most part rather than have it be mostly above ground. Once I dug enough dirt out to where I thought it would be deep enough, I started to test fit the metal fire ring for depth purposes but then I also used it as the template for which to create the circular brick portion around. With my digging tools I started widening the circle a little bit to make it large enough to fit the bricks. It was important to keep the bottom flat so the the bricks would be level. Once I got the bottom of the pit level I used my 3 foot level to make sure it was level. I was then able to stack all of the bricks in there in a circular pattern and then add the metal fire pit inside it. It turned out just as I planned and ended up using it quite a bit.

Steve and Leif’s Digital Food Thermometer Review-Tested in Fresh Cooked ...

DIY Chicken Egg Laying Bin Station built from Re-purposed Pallet Wood

From my scrap pile of extra pallets I need to make a DIY Chicken Egg  Laying Bin Station built  from Re-purposed Pallet Wood. My chickens are now laying eggs to they need they're own area in which to be comfortable, relax, and do some laying. I broke down a few pallets and I removed all of the nails with my pry bar and hammer. I was able to reuse a few of the nails. It's always fun to use the brad nailer so I secured everything with it. Once the nails were removed I lined up the now new raw materials (pallet slats) and then nailed down a couple end pieces to secure them all together and then one across the middle. This piece will act as the bottom. I did the same thing for the back piece. Just made an "L" shape with the wood then also nailed some side on it and then a front piece as well. The chickens were a little standoffish at first but once I put some bedding in there they took to it really nicely and played some eggs.



www.DIY-Technician.com

DIY Pallet Project-Simple Wall Mounted Pallet Paint Shelf Organizer

With some simple hand tools and a free old pallet you can make an up cycled DIY Pallet Project-Simple Wall Mounted Pallet Paint Shelf Organizer in no time flat. When choosing pallets, if I have the option, I try to pick ones that have all of the slats in good shape and also I like to pick the ones that are a little heartier. It's not always an option and often times I've had to just settle with what I can get. It is never a waste though because if a pallet just went to hell when I was taking it apart, I'd just use it for firewood to generate heat. If I didn't use it in the fireplace I could use it for outdoor burning in the firepit. Pallet wood burns quick and lights up nicely prepping a good coal bed to toss some longer burning logs on. So, in making this wall mounted pallet shelf I easily cut my pallet roughly in half, using the middle cross member as my cut line so it was nice and straight. I wanted it a little smaller so I sectioned it off once again basically making a smaller rectangle out of the bigger one. This left me with a section of pallet containing four cross members. I then took my hammer and pryer and carefully removed every other wooden slat. I used one of those wooden slats as bottom piece for this shelf. I even removed as many nails as I could and straightened the salvageable ones for reuse. No use in tossing out a perfectly good nail. I then took my cordless drill and a few drywall screws and mounted this sucker to the outside of my shed. After I mounted it I cut some bottom pieces for the leftover scraps for the bottom portion of the upper shelf on this fixture. This worked out perfectly for my storage needs.

Tools used:
Handsaw: https://amzn.to/2BBD4Ag
(Optional)Skillsaw: https://amzn.to/2P9VJLJ
Crowbar: https://amzn.to/2MCjeuZ
Cordless Drill: https://amzn.to/2P9VTCP
Hammer: https://amzn.to/2N6XE0H

How to make a Vertical Pallet Garden-Simply Done Pallet gardening Project

How to make a Vertical Pallet Garden-Simply Done Pallet gardening Project-Instructional "how to" style video with detailed step by step procedural instructions for making a vertical pallet garden for almost free. An old trampoline mat was used at the backing for this but you can use landscaping plastic sheeting, felt, garbage bags, or whatever else you can think of just to sort of hold the soil in from the back. I tried to use all recycled materials that I had laying around as part of the fun. After cutting to size I nailed the trampoline mat with some roofing nails I had left over. I had quite a few roofing nails that needed to be put to good use so I was liberal with their use on the backside of my newly constructed free vertical pallet garden. In this example I planted some strawberries that I had already started. They took off great and made for a nice crop. This project worked really well and is recommended if you have space restrictions you are concerned about. This would also work really well for flowers or an herb garden.

DIY Pallet Planter Box-Raised Beds for Gardening

I found myself with quite the collection of pallets just begging to be used for a project. I planned on a garden the year I made some raised beds. Once I knocked all of the nails out of the pallet boards I tried to reuse as many of the nails as I could. Some of them required a little bit of straightening. Be careful when cutting pallets on a table saw for the inherent risks that accompany using this saw but also because many times there are nails buried inside the wood that you don't readily see from the outside. I've hit a few nails with the table saw and you know it when you hit one. This project was relatively simple, just created the bottom square then nailed some vertical side pieces in. After that I just went around and nailed all of the boards to the vertical side pieces. Once I had it flush with the top I cut some boards for the trim at 45 degree angles in the corners for a specific look. I decided not to paint them but as an idea you could paint them the same color as your house, shed, or barn. In this project I had some extra boards so I created a bottom for this but really there is no need if you don't plan on moving them. They are super heavy when they are full of dirt anyway. Not only that but once you start watering whatever plants go in there the boards are going to start rotting. I had some triangular pieces left from one of the pallet disassemblies so they were a perfect fit for the bottom corners. You can't go wrong using pallets to make your planter boxes.

Tools used:

Table Saw: https://amzn.to/31W6epw

Cordless Drill: https://amzn.to/31WRgiO

Brad Nailer: https://amzn.to/30UA50b

Air Compressor: https://amzn.to/35ftvop

DIY Pallet Shoe Rack Organizer

This video provides Step by step instructions on how I made a DIY Pallet Shoe Rack that lasted for years for FREE!

After hand selecting which pallet I wanted to use I gathered up the necessary few tools I thought I would need. I didn't want the shoe rack to be too high so I but the pallet right in half with my hand saw. I also needed it to be limited to a certain width based on where I wanted to install it so I cut 1/3 of it off, widthwise with a skilsaw. Although I switched to a power tool here, you could do it all with a handsaw.

I then took my crowbar and hammer and removed the lower board. This gives me a top row for shoes and then a bottom row as well. I blew it all down with my air compressor to remove the saw dust.I then secured it to the wall with a couple of screws. Quick, easy, and free shoe rack organizer. You can paint it or have one of you kids paint it too for for an added custom touch.





Hand Saw: https://amzn.to/2nnuzWd

Crow Bar: https://amzn.to/2LSvlns

Cordless Drill: https://amzn.to/2pSseU7

Skilsaw: https://amzn.to/35aaV0R

Air Compressor: https://amzn.to/2OrJU34

Air Compressor Hose: https://amzn.to/2McblLm

Air Nozzle: https://amzn.to/35eBS3l



https://the-avant-garden.blogspot.com

https://diytechnician.tumblr.com

www.diy-technician.com



#pallets, #projects, #DIY, #wood, #woodworking, #DIYTechnician, #shoerack, #organizer

DIY Kiwi Shoe Polish Can Alcohol Home Made Burner & Cook Egg on Cast Iro...

To make this fun urban survival style DIY Kiwi Shoe Polish Can Alcohol Stove and be able to Cook Egg on a Cast Iron skillet over it's hot flame you'll first want to obtain some alcohol, a kiwi shoe polish can, a cordless drill or at least something to drill holes with. You'll then want to drill numerous tiny holes in the top lid of the kiwi shoe polish can. You'll then want to pop the lid back on after filling it with the isopropyl over the counter alcohol. Then you can go ahead and light it. This makes for a fun homemade burner project.

Amazon link to Kiwi Shoe Polish Can: https://amzn.to/32RRYy2

DIY Repurposed Vintage Wooden Cedar Fence Slat Wall Decoration

DIY Wine Cork Projects: Shell Display Base and Wine Cork Refrigerator Ma...

Wondering what to do with those old wine corks? Well here's another idea. This one incorporates the use of an old coat hanger as well. There's a saying that necessity is the mother of invention. This shell display needed a base and I had these corks and coat hanger laying around. Drilled down the center, lengthwise, of each cork with a drill bit that was the same size at the coat hanger. Then slid each cork on the coat hanger, formed it into a circular shape, then stuck each end into the opposing cork, then super glued together.